Operator Techniques Can Improve Shift Quality on Certain Motor Graders {1265, 1269, 1918, 3065, 3167, 3168, 5705, 7000, 7300}
- Motor Grader:
- 120M (S/N: R9A1-UP; B9C1-UP; B9N1-UP; B9W1-UP; D9W1-UP)
- 12M (S/N: R9B1-UP; B9F1-UP; B9R1-UP)
- 140MSeries 2 (S/N: M9D1-UP; R9G1-UP; M9J1-UP; R9M1-UP)
- 140M (S/N: B9D1-UP; B9G1-UP; D9G1-UP; B9M1-UP)
- 14M (S/N: B9J1-UP; R9J1-UP)
- 160MSeries 2 (S/N: M9E1-UP; M9K1-UP; R9L1-UP; R9T1-UP)
- 160M (S/N: B9E1-UP; B9L1-UP; B9T1-UP; D9T1-UP)
- 16M (S/N: B9H1-UP; R9H1-UP)
Variability of application and machine performance can combine to cause shift harshness. The shift harshness may be due to the operating techniques. Maintain a constant throttle setting or use the throttle lock in order to enhance the feel of shifting. Also, do not use the inching pedal when shifting gears.
Caterpillar Information System:
Machine Electronic Control System Electrical Component and Connector Locations
CP34 and CS34 Vibratory Soil Compactors Diagnostic Capabilities
2012/10/23 An Updated Assembly Procedure Now Used for E-stick Upper Wear Pads on Certain Backhoe Loaders {6533}
2011/09/27 Shipping Location of Keys for Machines Equipped with a Machine Security System (MSS) {7000, 7631}
Brake Hose for Front Axle Can Come Into Contact with Engine Coolant Lines{1380, 4257} Brake Hose for Front Axle Can Come Into Contact with Engine Coolant Lines{1380, 4257}
2011/10/19 New High Performance Seals are Available for Certain Backhoe Loaders {5456}
3516B and 3516C Engines for 789D Off-Highway Trucks Electrical Power Supply - Test
2011/12/14 New High Performance Seals are Available for Certain Backhoe Loaders {5457}
120M Series 2 Motor Grader Engine Supplement Radiator Guard and Support, Aftercooler, Hydraulic Oil Cooler, and Radiator - Remove and Install
Installation of the Cat® Detect Object Detection System 8 Radar Configuration for the 785 Off-Highway Truck {7347, 7348} Installation of the Cat® Detect Object Detection System 8 Radar Configuration for the 785 Off-Highway Truck {7347, 7348}
Engine Software Power Set Procedure for Tier 0 Software on 24M Motor Graders{1901, 1920, 7610, 7620} Engine Software Power Set Procedure for Tier 0 Software on 24M Motor Graders{1901, 1920, 7610, 7620}
C4.4 Engines for Caterpillar Built Machines Relief Valve (Fuel) - Remove and Install
793F AC Off-Highway Truck Power Train Final Drive Lubrication Pressure - Test
793F AC Off-Highway Truck Hydraulic Fan and Steering System Wheel and Brake
120M Series 2 Motor Grader Engine Supplement Rear Chassis Support - Remove and Install
2011/09/27 Updated Torque Values for Relief Valve Plugs on Certain Backhoe Loaders {5051}
CB22B, CB24B, CB32B, CB34B, CB34B XW, CC24B and CC34B Vibratory Utility Compactors Machine Electronic Control System General Information
2011/09/19 Improved O-ring Seals for the Fuel Injection Lines Are Used in Certain 3500 Off-Highway Truck Engines {1252, 7555}
2011/09/28 A New Break-out Harness Is Used for the Fuel Control Module on C175 Off-Highway Truck Engines {1403, 1408}
SC-57 Felling Head General Hazard Information
2012/03/21 A New Shimming Procedure is Now Used on the Truck Bodies on 793F Off-Highway Trucks {7000, 7006, 7250, 7258, 7960}
CP54B, CS54B and CS64B Vibratory Soil Compactors Machine Systems Piston Pump (Vibratory) - Remove and Install
R1600H Load Haul Dump Drive Shaft Universal Joints, Splines and Bearings - Inspect/Lubricate
R1600H Load Haul Dump Ejector Cylinder Bearing - Lubricate - If Equipped