2012/03/21 Caterpillar


A New Shimming Procedure is Now Used on the Truck Bodies on 793F Off-Highway Trucks {7000, 7006, 7250, 7258, 7960}

Usage:

793F XQ SND
Off-Highway Truck/Tractor:
793F (S/N: SND1-UP; SSP1-UP)
Service Magazine, SEPD1413, 21 March 2012, "A New Shimming Procedure is Now Used on the Truck Bodies on 793F Off-Highway Trucks". Disregard this article. Refer to the article that follows.

ReferenceDisassembly and Assembly, UENR2257, "793F Off-Highway Truck Field Assembly".

A new shimming procedure has been developed for use on the listed machines. The new procedure can be used when the machine is assembled and when the body is installed. The new procedure can be used on the listed machines back to the beginning of production.

For the new procedure, refer to "Install the 293-6301 Truck Body Mounting Gp " in the above listed document.

Caterpillar Information System:

SC-57 Felling Head General Hazard Information
2011/09/28 A New Break-out Harness Is Used for the Fuel Control Module on C175 Off-Highway Truck Engines {1403, 1408}
2011/09/19 Improved O-ring Seals for the Fuel Injection Lines Are Used in Certain 3500 Off-Highway Truck Engines {1252, 7555}
CB22B, CB24B, CB32B, CB34B, CB34B XW, CC24B and CC34B Vibratory Utility Compactors Machine Electronic Control System General Information
2011/09/27 Updated Torque Values for Relief Valve Plugs on Certain Backhoe Loaders {5051}
120M Series 2 Motor Grader Engine Supplement Rear Chassis Support - Remove and Install
793F AC Off-Highway Truck Hydraulic Fan and Steering System Wheel and Brake
793F AC Off-Highway Truck Power Train Final Drive Lubrication Pressure - Test
2011/09/19 Operator Techniques Can Improve Shift Quality on Certain Motor Graders {1265, 1269, 1918, 3065, 3167, 3168, 5705, 7000, 7300}
Machine Electronic Control System Electrical Component and Connector Locations
CP34 and CS34 Vibratory Soil Compactors Diagnostic Capabilities
2012/10/23 An Updated Assembly Procedure Now Used for E-stick Upper Wear Pads on Certain Backhoe Loaders {6533}
CP54B, CS54B and CS64B Vibratory Soil Compactors Machine Systems Piston Pump (Vibratory) - Remove and Install
R1600H Load Haul Dump Drive Shaft Universal Joints, Splines and Bearings - Inspect/Lubricate
R1600H Load Haul Dump Ejector Cylinder Bearing - Lubricate - If Equipped
R1600H Load Haul Dump Ejector Plate Bearing - Lubricate - If Equipped
2011/12/21 New Axle Oil Cooling Fan Motor Harness Now Used on R1600 and R1600G Load Haul Dump Machines {1365, 1408}
Machine Electronic Control System Electronic Control Module (ECM) - Flash Program
CW34 Pneumatic Compactor Machine Electronic Control System Electronic Control Module (ECM) - Configure
CB44B, CB54B, CD44B and CD54B Vibratory Asphalt Compactors Machine Electronic Control System Electronic Control Module (ECM) - Replace
CW34 Pneumatic Compactor Machine Electronic Control System Service Tools
Machine Electronic Control System Using the Electronic Service Tool to Determine Diagnostic Codes
CP56B, CP68B, CP74B, CS56B, CS68B, CS74B and CS78B Vibratory Soil Compactors Machine Electronic Control System Using the Operator Monitor to Determine Diagnostic Codes
PL87 Pipelayer Transmission Scavenge Screen - Clean
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.