Wheel and Brake
Show/hide table
Illustration 1 | g03455351 |
Show/hide table
Illustration 2 | g02720776 |
Show/hide table
Specification for 309-4133 Wheel and Brake Gp | |||
Item | Qty | Part | Specification Description |
1 | - | Rubber toric rings and all contacting surfaces must be clean at assembly. Apply a thin film of oil to the surfaces that contact the metal seals prior to assembly. | |
2 | 12 | 8T-4194 Bolt | Apply 9S-3263 Thread Lock to the threads of the 12 bolts. |
- | - | Perform the procedure in the Steering System Testing and Adjusting, "Front Wheel Bearing - Adjust" before you install these bolts. Apply 9S-3263 Thread Lock to the threads of the 14 bolts. Then, tighten the bolts to the specified torque. | |
3 | 2 | 7I-5617 Shim Pack | |
4 | 6 | 8T-4196 Bolt | Torque to |
5 | 14 | 145-9278 Bolt | Torque to |
6 | 1 | 309-4132 Wheel | Rim mounting surface to be free of paint and grease prior to assembly. |
7 | - | - | Lubricate seal with lubricant being sealed. |
8 | 2 | 6V-9167 Bolt | Torque to |
- | - | Use as required to obtain |
|
9 | 1 | 312-1180 Shim Pack | |
10 | 12 | 6V-5843 Bolt | Apply 155-0695 Thread Lock Compound to threads. |
11 | 8 | 8T-4136 Bolt | Apply 9S-3263 Thread Lock to the threads of the eight bolts. |
Caterpillar Information System:
793F AC Off-Highway Truck Power Train Final Drive Lubrication Pressure - Test
2011/09/19 Operator Techniques Can Improve Shift Quality on Certain Motor Graders {1265, 1269, 1918, 3065, 3167, 3168, 5705, 7000, 7300}
Machine Electronic Control System Electrical Component and Connector Locations
CP34 and CS34 Vibratory Soil Compactors Diagnostic Capabilities
2012/10/23 An Updated Assembly Procedure Now Used for E-stick Upper Wear Pads on Certain Backhoe Loaders {6533}
2011/09/27 Shipping Location of Keys for Machines Equipped with a Machine Security System (MSS) {7000, 7631}
Brake Hose for Front Axle Can Come Into Contact with Engine Coolant Lines{1380, 4257} Brake Hose for Front Axle Can Come Into Contact with Engine Coolant Lines{1380, 4257}
2011/10/19 New High Performance Seals are Available for Certain Backhoe Loaders {5456}
3516B and 3516C Engines for 789D Off-Highway Trucks Electrical Power Supply - Test
2011/12/14 New High Performance Seals are Available for Certain Backhoe Loaders {5457}
120M Series 2 Motor Grader Engine Supplement Radiator Guard and Support, Aftercooler, Hydraulic Oil Cooler, and Radiator - Remove and Install
Installation of the Cat® Detect Object Detection System 8 Radar Configuration for the 785 Off-Highway Truck {7347, 7348} Installation of the Cat® Detect Object Detection System 8 Radar Configuration for the 785 Off-Highway Truck {7347, 7348}
120M Series 2 Motor Grader Engine Supplement Rear Chassis Support - Remove and Install
2011/09/27 Updated Torque Values for Relief Valve Plugs on Certain Backhoe Loaders {5051}
CB22B, CB24B, CB32B, CB34B, CB34B XW, CC24B and CC34B Vibratory Utility Compactors Machine Electronic Control System General Information
2011/09/19 Improved O-ring Seals for the Fuel Injection Lines Are Used in Certain 3500 Off-Highway Truck Engines {1252, 7555}
2011/09/28 A New Break-out Harness Is Used for the Fuel Control Module on C175 Off-Highway Truck Engines {1403, 1408}
SC-57 Felling Head General Hazard Information
2012/03/21 A New Shimming Procedure is Now Used on the Truck Bodies on 793F Off-Highway Trucks {7000, 7006, 7250, 7258, 7960}
CP54B, CS54B and CS64B Vibratory Soil Compactors Machine Systems Piston Pump (Vibratory) - Remove and Install
R1600H Load Haul Dump Drive Shaft Universal Joints, Splines and Bearings - Inspect/Lubricate
R1600H Load Haul Dump Ejector Cylinder Bearing - Lubricate - If Equipped
R1600H Load Haul Dump Ejector Plate Bearing - Lubricate - If Equipped
2011/12/21 New Axle Oil Cooling Fan Motor Harness Now Used on R1600 and R1600G Load Haul Dump Machines {1365, 1408}