Fuel Manifold - Remove
开始:
- 拆下燃油滤清器底座。 请参阅拆解和组装, "燃油滤清器底座 - 拆卸和安装"。
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
注意 |
---|
在进行检验、保养、测试、调整及维修产品期间,必须小心以确保装好排放出的油液。 在打开任何舱室或解体任何储有液体的部件之前,要准备好合适的容器收集液体。 有关收集和盛接 Cat 产品上油液的适用工具和用品,请参阅专门出版物, NENG2500, "代理商维修工具目录"。 按照当地法规和要求处置所有液体。 |
- 拆下螺栓 (2) 后将线束组件放到一边。
- 拆下螺栓 (3) 和垫圈。
- 拆下燃油歧管 (1) 。
Show/hide table
图 2 g00846262 - 从燃油歧管 (1) 上卸下 O 形密封圈 (4)。
- 必要时拆下螺塞 (5) O 形密封圈。
Show/hide table
图 1 | g00846247 |
Caterpillar Information System:
3116 and 3126 Marine Engines Sensors and Electrical Components
C9 Engines for Caterpillar Built Machines Electric Starting Motor - Remove and Install
C9 Engine For Caterpillar Built Machines Alternator - Remove and Install
G3300 Engines Crankcase Blowby - Measure/Record
3176C Industrial Engine Belt Tightener - Remove and Install
3612 and 3616 Engines Water Temperature Regulator
Installation And Initial Start Up Procedures For G3300 And G3400 Engines{1000} Installation And Initial Start Up Procedures For G3300 And G3400 Engines{1000}
3500B and 3500B High Displacement Generator Set Engines Exhaust Temperature Is Too High
3406E On-Highway Engine Turbocharger - Assemble
3516B Engine for Caterpillar Built Machines Fuel Dilution of Engine Oil
3524B Engines for Off-Highway Trucks Coolant Temperature Is Too High
3606 and 3608 Engines Exhaust Manifold
G3300 Engines Turbocharger - Inspect
G3300 Engines Valve Stem Projection - Measure/Record
3176C and 3196 Engines For Caterpillar Built Machines Fuel Manifold - Install
G3300 Engines Overhaul Considerations
G3300 Engines Overhaul (Top End)
G3300 Engines Overhaul (Major)
3612 and 3616 Engines Cylinder Liner
Electronic Modular Control Panel II+ (EMCP II+) Component Location - For 3306B and 3406C MUI Engines
3612 and 3616 Engines Piston and Rings - Four Ring Piston
3176C and 3196 Engines For Caterpillar Built Machines Coolant Temperature Sensor - Remove and Install
G3300 Engines Alarms and Shutoffs
3176C and 3196 Engines For Caterpillar Built Machines Electronic Control Module - Remove and Install