Exhaust Manifold
Show/hide table
 | |
| 图 1 | g00518570 |
Show/hide table
 | |
| 图 2 | g00518568 |
(1) 将 5P-3931 防粘结剂 涂抹在螺栓的螺纹上，并将螺栓拧紧至以下扭矩。 ... 55 ± 10 N·m (40 ± 7 lb ft)
(2) 将 5P-3931 防粘结剂 涂抹在螺塞的螺纹上，并将螺塞拧紧至以下扭矩。 ... 130 ± 15 N·m (96 ± 11 lb ft)
(3) 将 5P-3931 防粘结剂 涂抹在适配器的螺纹上，并将适配器拧紧至以下扭矩。 ... 200 ± 25 N·m (150 ± 18 lb ft)
(4) 组装时将 5P-3931 防粘结剂 涂抹在盖的螺纹上。
(5) 将 5P-3931 防粘结剂 涂抹垫圈表面上，并将用于固定排气歧管的螺栓拧紧至以下扭矩。 ... 120 ± 20 N·m (90 ± 15 lb ft)
(6) 将 5P-3931 防粘结剂 涂抹在螺栓的螺纹上，并将螺栓拧紧至以下扭矩。 ... 135 ± 20 N·m (100 ± 15 lb ft)
Caterpillar Information System:
3524B Engines for Off-Highway Trucks Low Engine Oil Pressure
3516B Engine for Caterpillar Built Machines Engine Has Early Wear
3500B and 3500B High Displacement Generator Set Engines Oil Contains Coolant
3176C Engine Cooling System Coolant (ELC) - Change
3524B Engines for Off-Highway Trucks Fuel in Cooling System
3176C and 3196 Industrial Engines Speed/Timing Sensor - Remove and Install
3176C and 3196 Industrial Engines Engine Oil Pressure Sensor - Remove and Install
G3300 Engines Cooling System Coolant (DEAC) - Change
C-10 and C-12 Truck Engines Compression Brake
G3500 Engines Camshaft
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Engine Oil in Cooling System
G3300 Engines Ignition System Spark Plugs - Inspect/Replace
3524B Engines for Off-Highway Trucks Coolant Temperature Is Too High
3516B Engine for Caterpillar Built Machines Fuel Dilution of Engine Oil
3406E On-Highway Engine Turbocharger - Assemble
3500B and 3500B High Displacement Generator Set Engines Exhaust Temperature Is Too High
Installation And Initial Start Up Procedures For G3300 And G3400 Engines{1000} Installation And Initial Start Up Procedures For G3300 And G3400 Engines{1000}
3612 and 3616 Engines Water Temperature Regulator
3176C Industrial Engine Belt Tightener - Remove and Install
G3300 Engines Crankcase Blowby - Measure/Record
C9 Engine For Caterpillar Built Machines Alternator - Remove and Install
C9 Engines for Caterpillar Built Machines Electric Starting Motor - Remove and Install
3116 and 3126 Marine Engines Sensors and Electrical Components
3176C and 3196 Engines For Caterpillar Built Machines Fuel Manifold - Remove