Removal Procedure
Tools Needed     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 8S-8048     | Saddle     | 1     |
8S-7615 | Pin     | 1     | |
8S-7641 | Tube     | 1     | |
8S-7630 | Stand     | 1     |
Start By:
- Connect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
- Disconnect any attachment tools from the quick coupler.
- Install tooling (A) under the crossmember of the lift arms.
Illustration 1 | g00462949 |
- Release the pressure in the hydraulic system. Refer to Disassembly and Assembly, "Hydraulic System Pressure - Release".
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide", for tools and supplies suitable to collect and contain fluids in Caterpillar machines. Dispose of all fluids according to local regulations and mandates. |
High hydraulic system pressure. To avoid personal injury, do not remove any hydraulic system lines, taps, or parts until all pressure has been relieved. |
- Remove bolts (1), the washers and the clips.
Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes. This will aid in reassembly.
Note: Plug and cap all hoses and all lines. This will help to prevent fluid loss and this will help to keep contaminants from entering the system.
Illustration 2 | g00462950 |
- Remove tube assembly (2) .
- Remove tube assembly (3) from the rod end of the lift cylinder.
Illustration 3 | g00462951 |
- Attach two lifting straps and a hoist to the lift cylinder. Remove bolt (5), the washer and the spacer. Remove pin (4) .
- Remove bolt (6) and the washer from pin (7). Remove pin (7). Remove the lift cylinder. The weight of the cylinder is 57 kg (125 lb).
Illustration 4 | g00462952 |
- Remove seals (8) .
Illustration 5 | g00462953 |