Truck Body Retaining Cable - Remove and Install
Show/hide table
The space between the body and the frame becomes a zero clearance area when the body is lowered. Failure to install the retaining cable can result in injury or death to personnel working in this area. |
- Raise the truck body.
Show/hide table
Illustration 2 g00462508 Show/hide tableIllustration 3 g00462509 - Rotate plate (2).
- Use a suitable lifting device in order to support the weight of retaining cable (1). The retaining cable weighs approximately
39.5 kg (87.08 lb) . - Remove two bolts (5), the two washers, two nuts (6), coupler (7), and the retaining cable.
- If necessary, remove five bolts (6), five washers, strip (5), and mud flap (10).
Show/hide table
Illustration 1 | g00462507 |
View of the retaining cable in the stored position |
- If the following components were removed, install mud flap (10), strip (5), five washers, and five bolts (6).
- Use a suitable lifting device in order to support the weight of retaining cable (1). The retaining cable weighs approximately
39.5 kg (87.08 lb) . - Install the retaining cable, two nuts (6), the two washers, two bolts (5), and coupler (7).
- Rotate plate (2).
Show/hide table
Illustration 6 g00462507 View of the retaining cable in the stored position - Lower the truck body.
Show/hide table
Illustration 4 | g00462509 |
Show/hide table
Illustration 5 | g00462508 |
Caterpillar Information System:
793C Off-Highway Truck Machine Systems Suspension Seat - Remove and Install
550, 570 and 580 Wheel Harvesters Piston Motor (Swing Drive) - Install
550, 570 and 580 Wheel Harvesters Piston Motor (Swing Drive) - Remove
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Vibratory System Pump Servo Neutral - Adjust
D7R Track-Type TractorPower Train Electronic Control System Components
3304B and 3306B Engines for Caterpillar Built Machines Fuel Transfer Pump - Install
789C Off-Highway Truck Power Train Transmission Hydraulic System
550, 570 and 580 Wheel Harvesters Stick Cylinder - Install
D6R Track-Type Tractor Power Train Transmission Lubrication
550, 570 and 580 Wheel Harvesters Stick Cylinder - Remove
789C Off-Highway Truck Power Train Torque Converter
789C Off-Highway Truck Power Train Gear Pump (Torque Converter, Parking Brake Release, and Brake Cooling)
966G Wheel Loader and 972G Wheel Loader Power Train Relief Valve (Torque Converter Inlet)
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Vibratory System Piston Motor Case Drain Flow - Test and Adjust
IT14G Integrated Toolcarrier and 914G Wheel Loader Braking System Inching Valve - Test
793B Off-Highway Truck Power Train Transmission Clutch Engagement
784C, 785C and 785C HAA Off-Highway Truck/Tractors Power Train Rotary Actuator (Transmission)
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Propel System Propel System Troubleshooting
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Lift Cylinder - Remove
793C Off-Highway Truck Machine Systems Valve (Suspension Cylinder Charging) - Disassemble
793C Off-Highway Truck Machine Systems Valve (Suspension Cylinder Charging) - Assemble
789C Off-Highway Truck Machine Systems Resistor - Remove and Install
793C Off-Highway Truck Machine Systems Resistor Assembly - Remove and Install
D250E Series II and D300E Series II Articulated Trucks Machine Systems Hoist Control Valve - Remove