Piston Motor (Swing Drive) - Install
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 161-9713 | Hex Bit | 1 |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Attach a suitable lifting device to swing motor (5). Position swing motor (5) to the machine. The weight of the swing motor is approximately
60 kg (135 lb) .Show/hide tableIllustration 2 g00600547 Show/hide tableIllustration 3 g00600581 - Use Tooling (A) in order to install four bolts (3) that attach the swing motor to the machine. Three of the bolts have a washer and nut (4). The fourth bolt is threaded directly into the platform.
Show/hide table
Illustration 4 g00600491 - Place the plate in position on the machine. Align the two dowel pins with the holes in the plate. Install bolts (2) in the plate.
Show/hide table
Illustration 5 g00600149 - Connect hose assemblies (1) to the swing motor.
- Tilt down the cab. Refer to Operation and Maintenance Manual, "Cab Tilting".
Show/hide table
Illustration 1 | g00953610 |
Caterpillar Information System:
550, 570 and 580 Wheel Harvesters Piston Motor (Swing Drive) - Remove
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Vibratory System Pump Servo Neutral - Adjust
D7R Track-Type TractorPower Train Electronic Control System Components
3304B and 3306B Engines for Caterpillar Built Machines Fuel Transfer Pump - Install
789C Off-Highway Truck Power Train Transmission Hydraulic System
550, 570 and 580 Wheel Harvesters Stick Cylinder - Install
D6R Track-Type Tractor Power Train Transmission Lubrication
550, 570 and 580 Wheel Harvesters Stick Cylinder - Remove
789C Off-Highway Truck Power Train Torque Converter
789C Off-Highway Truck Power Train Gear Pump (Torque Converter, Parking Brake Release, and Brake Cooling)
784C, 785C and 785C HAA Off-Highway Truck/Tractors Power Train Torque Converter Hydraulic System
784C, 785C and 785C HAA Off-Highway Truck/Tractors Power Train Torque Converter Hydraulic System
793C Off-Highway Truck Machine Systems Suspension Seat - Remove and Install
793C Off-Highway Truck Machine Systems Truck Body Retaining Cable - Remove and Install
966G Wheel Loader and 972G Wheel Loader Power Train Relief Valve (Torque Converter Inlet)
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Vibratory System Piston Motor Case Drain Flow - Test and Adjust
IT14G Integrated Toolcarrier and 914G Wheel Loader Braking System Inching Valve - Test
793B Off-Highway Truck Power Train Transmission Clutch Engagement
784C, 785C and 785C HAA Off-Highway Truck/Tractors Power Train Rotary Actuator (Transmission)
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Propel System Propel System Troubleshooting
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Lift Cylinder - Remove
793C Off-Highway Truck Machine Systems Valve (Suspension Cylinder Charging) - Disassemble
793C Off-Highway Truck Machine Systems Valve (Suspension Cylinder Charging) - Assemble
789C Off-Highway Truck Machine Systems Resistor - Remove and Install