Valve (Suspension Cylinder Charging) - Assemble
Assembly Procedure
- Install ring (14), O-ring seal (13), and O-ring seal (11) on check valve (12) .
Note: Inspect the O-ring seals. Replace any O-ring seals that are worn or damaged.
Note: Before installation, apply 1U-6396 O-ring Assembly Compound to the O-ring seals.
Show/hide table
Illustration 1 | g00462869 |
- Install check valve assembly (10) in manifold (3) .
Show/hide table
Illustration 2 | g00462868 |
- Tighten two bolts (8) in order to connect manifold (3) and pressure sensor (9) of VIMS for the suspension cylinder.
Show/hide table
Illustration 3 | g00462867 |
- Install washer (7) and valve assembly (6) in manifold (3) .
Show/hide table
Illustration 4 | g00462847 |
- Install washer (5) and valve assembly (4) in manifold (3) .
- Install two O-ring seals (2) in manifold (3) .
Show/hide table
Illustration 5 | g00462790 |
End By: Install the charging valve (suspension cylinder). Refer to Disassembly and Assembly, "Valve (Suspension Cylinder Charging) - Remove and Install" for the correct procedure.
Caterpillar Information System:
793C Off-Highway Truck Machine Systems Valve (Suspension Cylinder Charging) - Disassemble
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Lift Cylinder - Remove
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Propel System Propel System Troubleshooting
784C, 785C and 785C HAA Off-Highway Truck/Tractors Power Train Rotary Actuator (Transmission)
793B Off-Highway Truck Power Train Transmission Clutch Engagement
IT14G Integrated Toolcarrier and 914G Wheel Loader Braking System Inching Valve - Test
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Vibratory System Piston Motor Case Drain Flow - Test and Adjust
966G Wheel Loader and 972G Wheel Loader Power Train Relief Valve (Torque Converter Inlet)
793C Off-Highway Truck Machine Systems Truck Body Retaining Cable - Remove and Install
793C Off-Highway Truck Machine Systems Suspension Seat - Remove and Install
550, 570 and 580 Wheel Harvesters Piston Motor (Swing Drive) - Install
550, 570 and 580 Wheel Harvesters Piston Motor (Swing Drive) - Remove
789C Off-Highway Truck Machine Systems Resistor - Remove and Install
793C Off-Highway Truck Machine Systems Resistor Assembly - Remove and Install
D250E Series II and D300E Series II Articulated Trucks Machine Systems Hoist Control Valve - Remove
793C Off-Highway Truck Machine Systems Switch Assembly (Main Power) - Remove and Install
793B Off-Highway Truck Power Train Rear Axle and Final Drive System
789C Off-Highway Truck Power Train Electronic Control Module (Power Train)
IT14G Integrated Toolcarrier and 914G Wheel Loader Braking System General Information
IT14G Integrated Toolcarrier and 914G Wheel Loader Braking System General Information
IT14G Integrated Toolcarrier and 914G Wheel Loader Braking System Parking Brake - Manual Release
65E, 75E, 85E and 95E Agricultural Tractors Safety Signs and Labels
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Lift Cylinder - Install
D7R Track-Type TractorPower Train Track Roller Frame