Suspension Seat - Remove and Install
Removal Procedure
Show/hide table
In order to prevent possible personal injury, release the air pressure from the air tank before disconnecting any components of the air system. |
- Disconnect tube assemblies (3) and (4) .
Show/hide table
Illustration 1 | g00462448 |
Show/hide table
Illustration 2 | g00462449 |
- Remove six bolts (2) and the six washers.
- Use two people to remove seat assembly (1). The seat assembly weighs approximately 58 kg (127.9 lb).
Installation Procedure
- Use two people to install seat assembly (1). The seat assembly weighs approximately 58 kg (127.9 lb).
Show/hide table
Illustration 3 | g00462448 |
Show/hide table
Illustration 4 | g00462449 |
- Install the six washers and six bolts (2) .
- Connect tube assemblies (3) and (4) .
- Refer to Operation and Maintenance Manual, "Starting with an External Air Supply" in order to refill the air tank.
Caterpillar Information System:
550, 570 and 580 Wheel Harvesters Piston Motor (Swing Drive) - Install
550, 570 and 580 Wheel Harvesters Piston Motor (Swing Drive) - Remove
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Vibratory System Pump Servo Neutral - Adjust
D7R Track-Type TractorPower Train Electronic Control System Components
3304B and 3306B Engines for Caterpillar Built Machines Fuel Transfer Pump - Install
789C Off-Highway Truck Power Train Transmission Hydraulic System
550, 570 and 580 Wheel Harvesters Stick Cylinder - Install
D6R Track-Type Tractor Power Train Transmission Lubrication
550, 570 and 580 Wheel Harvesters Stick Cylinder - Remove
789C Off-Highway Truck Power Train Torque Converter
789C Off-Highway Truck Power Train Gear Pump (Torque Converter, Parking Brake Release, and Brake Cooling)
784C, 785C and 785C HAA Off-Highway Truck/Tractors Power Train Torque Converter Hydraulic System
793C Off-Highway Truck Machine Systems Truck Body Retaining Cable - Remove and Install
966G Wheel Loader and 972G Wheel Loader Power Train Relief Valve (Torque Converter Inlet)
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Vibratory System Piston Motor Case Drain Flow - Test and Adjust
IT14G Integrated Toolcarrier and 914G Wheel Loader Braking System Inching Valve - Test
793B Off-Highway Truck Power Train Transmission Clutch Engagement
784C, 785C and 785C HAA Off-Highway Truck/Tractors Power Train Rotary Actuator (Transmission)
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Propel System Propel System Troubleshooting
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Lift Cylinder - Remove
793C Off-Highway Truck Machine Systems Valve (Suspension Cylinder Charging) - Disassemble
793C Off-Highway Truck Machine Systems Valve (Suspension Cylinder Charging) - Assemble
789C Off-Highway Truck Machine Systems Resistor - Remove and Install
793C Off-Highway Truck Machine Systems Resistor Assembly - Remove and Install