Resistor Assembly - Remove and Install
Removal Procedure
Start By:
- Install the truck body retaining cable. Refer to Disassembly and Assembly, "Truck Body Retaining Cable - Remove and Install" for the correct procedure.
- Remove the compartment cover from the rear of the cab. Refer to Disassembly and Assembly, "Cover (Cab Rear) - Remove and Install" for the correct procedure.
Show/hide table
The space between the body and the frame becomes a zero clearance area when the body is lowered. Failure to install the retaining cable can result in injury or death to personnel working in this area. |
- Disconnect electrical connection (1) .
Show/hide table
Illustration 1 | g00462991 |
- Remove bolt (3) and the washer.
- Remove resistor assembly (2) .
- Remove the remaining two resistor assemblies in the same manner.
Installation Procedure
- Install resistor assembly (2) .
Show/hide table
Illustration 2 | g00462991 |
- Install bolt (3) and the washer.
- Connect electrical connection (1) .
- Install the remaining two resistor assemblies in the same manner.
End By:
- Install the compartment cover at the rear of the cab. Refer to Disassembly and Assembly, "Cover (Cab Rear) - Remove and Install" for the correct procedure.
- Remove the truck body retaining cable. Refer to Disassembly and Assembly, "Truck Body Retaining Cable - Remove and Install" for the correct procedure.
Caterpillar Information System:
789C Off-Highway Truck Machine Systems Resistor - Remove and Install
793C Off-Highway Truck Machine Systems Valve (Suspension Cylinder Charging) - Assemble
793C Off-Highway Truck Machine Systems Valve (Suspension Cylinder Charging) - Disassemble
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Lift Cylinder - Remove
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Propel System Propel System Troubleshooting
784C, 785C and 785C HAA Off-Highway Truck/Tractors Power Train Rotary Actuator (Transmission)
793B Off-Highway Truck Power Train Transmission Clutch Engagement
IT14G Integrated Toolcarrier and 914G Wheel Loader Braking System Inching Valve - Test
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Vibratory System Piston Motor Case Drain Flow - Test and Adjust
966G Wheel Loader and 972G Wheel Loader Power Train Relief Valve (Torque Converter Inlet)
793C Off-Highway Truck Machine Systems Truck Body Retaining Cable - Remove and Install
793C Off-Highway Truck Machine Systems Suspension Seat - Remove and Install
D250E Series II and D300E Series II Articulated Trucks Machine Systems Hoist Control Valve - Remove
793C Off-Highway Truck Machine Systems Switch Assembly (Main Power) - Remove and Install
793B Off-Highway Truck Power Train Rear Axle and Final Drive System
789C Off-Highway Truck Power Train Electronic Control Module (Power Train)
IT14G Integrated Toolcarrier and 914G Wheel Loader Braking System General Information
IT14G Integrated Toolcarrier and 914G Wheel Loader Braking System General Information
IT14G Integrated Toolcarrier and 914G Wheel Loader Braking System Parking Brake - Manual Release
65E, 75E, 85E and 95E Agricultural Tractors Safety Signs and Labels
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Lift Cylinder - Install
D7R Track-Type TractorPower Train Track Roller Frame
793C Off-Highway Truck Machine Systems Gear Pump (Brake Release and Oil Cooling) - Disassemble
IT14G Integrated Toolcarrier and 914G Wheel Loader Braking System Parking Brake Control - Adjust