Stick Cylinder - Install
Installation Procedure
- Place the stick cylinder in position on the machine.
Show/hide table
 | |
| Illustration 1 | g00602335 |
- Install pivot pin (5). Install bolt (4) .
Show/hide table
 | |
| Illustration 2 | g00602297 |
- Install pivot pin (3). Install bolt (2) .
Show/hide table
 | |
| Illustration 3 | g00602290 |
- Connect two hydraulic hose assemblies (1) .
Show/hide table
 | |
| Illustration 4 | g00602287 |
End By: Operate the stick cylinder in order to purge air from the system.
Caterpillar Information System:
D6R Track-Type Tractor Power Train Transmission Lubrication
550, 570 and 580 Wheel Harvesters Stick Cylinder - Remove
789C Off-Highway Truck Power Train Torque Converter
789C Off-Highway Truck Power Train Gear Pump (Torque Converter, Parking Brake Release, and Brake Cooling)
784C, 785C and 785C HAA Off-Highway Truck/Tractors Power Train Torque Converter Hydraulic System
784C, 785C and 785C HAA Off-Highway Truck/Tractors Power Train Torque Converter Hydraulic System
3304B and 3306B Engines for Caterpillar Built Machines Fuel Transfer Pump - Remove
789C Off-Highway Truck Power Train Torque Converter Hydraulic System
793C Off-Highway Truck Machine Systems Parking Brake Control Valve - Assemble
D6R Track-Type Tractor Power Train Magnetic Screen
793C Off-Highway Truck Machine Systems Parking Brake Control Valve - Disassemble
793B Off-Highway Truck Power Train Pressure Switch (Service Brake and Retarder)
789C Off-Highway Truck Power Train Transmission Hydraulic System
3304B and 3306B Engines for Caterpillar Built Machines Fuel Transfer Pump - Install
D7R Track-Type TractorPower Train Electronic Control System Components
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Vibratory System Pump Servo Neutral - Adjust
550, 570 and 580 Wheel Harvesters Piston Motor (Swing Drive) - Remove
550, 570 and 580 Wheel Harvesters Piston Motor (Swing Drive) - Install
793C Off-Highway Truck Machine Systems Suspension Seat - Remove and Install
793C Off-Highway Truck Machine Systems Truck Body Retaining Cable - Remove and Install
966G Wheel Loader and 972G Wheel Loader Power Train Relief Valve (Torque Converter Inlet)
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Vibratory System Piston Motor Case Drain Flow - Test and Adjust
IT14G Integrated Toolcarrier and 914G Wheel Loader Braking System Inching Valve - Test
793B Off-Highway Truck Power Train Transmission Clutch Engagement