Mix Height Control
Show/hide table
 | |
| Illustration 1 | g00853249 |
Right Side Control Box | |
Mix height control dial (1) is located on both of the screed control boxes for machines that have electronic systems. Mix height control switch (2) is located on both of the screed control boxes for machines that have no electronic systems. Both of the controls for the adjustment of the mix height are options.
To control the height of the mix at the augers, use dial (1) or switch (2). This is dependent on the machine and the option that is ordered. Turn dial (1) clockwise in order to increase the height of the mix. Move switch (2) upward or move switch (2) downward in order to adjust the height of the mix.
Caterpillar Information System:
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks Engine Fan Control Solenoid Circuit - Test
CB-634D Vibratory Compactor Machine Systems Piston Pump (Drum Propel) - Install
834G Wheel Tractor and 836G Landfill Compactor Engine Supplement Fan Group (Includes Fan, Fan Shroud, and Hydraulic Fan Motor) - Install
2002/05/27 A Special Instruction, REHS1228, "Field Installation of the Open Circuit Oil Breather Gp (Engine Kit)" Is Available {1058}
2002/03/01 Procedure For Cleaning Engine Bolts {1000}
CB-634D Vibratory Compactor Machine Systems Piston Pump (Drum Propel) - Remove
CB-634D Vibratory Compactor Machine Systems Piston Pump (Vibratory) - Install
CB-634D Vibratory Compactor Machine Systems Piston Pump (Vibratory) - Remove
2003/12/01 Maintaining the Mechanical Linkage Between the Engine Flywheel and the Hydrostatic Pump {3203, 5070}
533 Wheel Feller Buncher and 543 Wheel Feller Buncher Power Train Monitoring System
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System Transmission Control (Shift Lever)
834G Wheel Tractor and 836G Landfill Compactor Engine Supplement Radiator Top Tank - Install
2002/05/27 Addition to Testing and Adjusting , "Torque Converter Stall - Test" {3101}
3126B Engine for Caterpillar Built Machines Speed Sensor
735, 740 and 740 EJECTOR Articulated Trucks Machine Systems Steering Cylinder - Remove and Install
735 Articulated Truck Power Train Wheel Bearings and Duo-Cone Seals (Rear) - Install
2002/01/28 Service Spools for Backhoe Valves {5051}
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System Charging System
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System Electronic Control Module (ECM) - Replace
CB-634D Vibratory Compactor Machine Systems Hydraulic Cylinder (Steering) - Remove and Install
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System Glossary of Electrical Terms
14H and 16H Motor Graders Hydraulic and Steering System Articulation Cylinder
CB-634D Vibratory Compactor Machine Systems Steering Wheel - Remove and Install
TL2 Series In-Line Rippers Maintenance Interval Schedule