Piston Pump (Drum Propel) - Install
Installation Procedure
- Install coupling hub (7) to piston pump (2) . Set Dimension (X) to a distance of 60 ± 1 mm (2.36 ± 0.04 inch). Tighten bolt (6) to a torque of 145 N·m (107 lb ft).
Show/hide table
 | |
| Illustration 1 | g01337962 |
- Use a lifting strap and a hoist to position propel pump (2) on the engine. The weight of the propel pump is 42 kg (93 lb). Install two bolts (5) .
Show/hide table
 | |
| Illustration 2 | g00853192 |
- Connect electrical connector (4) . Install electrical connector (4) in the clip. Install the tie strap that fastens electrical connector (4) to the bracket.
Show/hide table
 | |
| Illustration 3 | g00853190 |
- Install hose assemblies (3) on propel pump (2) .
Show/hide table
 | |
| Illustration 4 | g00853188 |
- Install hose assemblies (1) on propel pump (2) .
Show/hide table
 | |
| Illustration 5 | g00853187 |
End By: Install the vibratory pump. Refer to Disassembly and Assembly, "Vibratory Pump - Install".
Caterpillar Information System:
834G Wheel Tractor and 836G Landfill Compactor Engine Supplement Fan Group (Includes Fan, Fan Shroud, and Hydraulic Fan Motor) - Install
2002/05/27 A Special Instruction, REHS1228, "Field Installation of the Open Circuit Oil Breather Gp (Engine Kit)" Is Available {1058}
2002/03/01 Procedure For Cleaning Engine Bolts {1000}
CB-634D Vibratory Compactor Machine Systems Piston Pump (Drum Propel) - Remove
CB-634D Vibratory Compactor Machine Systems Piston Pump (Vibratory) - Install
CB-634D Vibratory Compactor Machine Systems Piston Pump (Vibratory) - Remove
2003/12/01 Maintaining the Mechanical Linkage Between the Engine Flywheel and the Hydrostatic Pump {3203, 5070}
533 Wheel Feller Buncher and 543 Wheel Feller Buncher Power Train Monitoring System
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System Transmission Control (Shift Lever)
834G Wheel Tractor and 836G Landfill Compactor Engine Supplement Radiator Top Tank - Install
2002/01/21 Changes to the Rear Spindle and to the Bearing Cone {4208, 4234, 7551}
CB-634D Vibratory Compactor Machine Systems Brake Pump - Remove and Install
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks Engine Fan Control Solenoid Circuit - Test
AS2251 Screed Mix Height Control
2002/05/27 Addition to Testing and Adjusting , "Torque Converter Stall - Test" {3101}
3126B Engine for Caterpillar Built Machines Speed Sensor
735, 740 and 740 EJECTOR Articulated Trucks Machine Systems Steering Cylinder - Remove and Install
735 Articulated Truck Power Train Wheel Bearings and Duo-Cone Seals (Rear) - Install
2002/01/28 Service Spools for Backhoe Valves {5051}
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System Charging System
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System Electronic Control Module (ECM) - Replace
CB-634D Vibratory Compactor Machine Systems Hydraulic Cylinder (Steering) - Remove and Install
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System Glossary of Electrical Terms
14H and 16H Motor Graders Hydraulic and Steering System Articulation Cylinder