Articulation Cylinder
Show/hide table
Illustration 1 | g00816771 |
(A) Outer diameter of new piston over two lands ... 88.40 ± 0.03 mm (3.480 ± 0.001 inch)
(B) Bore of new cylinder assembly ... 88.90 ± 0.08 mm (3.500 ± 0.003 inch)
(C) Outer diameter of new rod ... 50.750 ± 0.038 mm (1.9980 ± 0.0015 inch)
(D) Bore of new head over four lands ... 51.13 ± 0.03 mm (2.010 ± 0.001 inch)
(1) Apply 7M-7456 Bearing Mount Compound to the seal groove prior to assembling the wiper seal.
(2) Lubricate sealing lips with a thin covering of the lubricant that is being sealed.
(3) Torque for head ... 600 ± 130 N·m (440 ± 95 lb ft)
Note: Lubricate the threads with clean grease. Use 1P-0808 Grease Cartridge Group to apply the grease.
Caterpillar Information System:
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System Glossary of Electrical Terms
CB-634D Vibratory Compactor Machine Systems Hydraulic Cylinder (Steering) - Remove and Install
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System Electronic Control Module (ECM) - Replace
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System Charging System
2002/01/28 Service Spools for Backhoe Valves {5051}
735 Articulated Truck Power Train Wheel Bearings and Duo-Cone Seals (Rear) - Install
735, 740 and 740 EJECTOR Articulated Trucks Machine Systems Steering Cylinder - Remove and Install
3126B Engine for Caterpillar Built Machines Speed Sensor
2002/05/27 Addition to Testing and Adjusting , "Torque Converter Stall - Test" {3101}
AS2251 Screed Mix Height Control
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks Engine Fan Control Solenoid Circuit - Test
CB-634D Vibratory Compactor Machine Systems Piston Pump (Drum Propel) - Install
CB-634D Vibratory Compactor Machine Systems Steering Wheel - Remove and Install
TL2 Series In-Line Rippers Maintenance Interval Schedule
CB-634D Vibratory Compactor Machine Systems Steering Column - Remove and Install
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Cooling System
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Basic Engine
CB-634D Vibratory Compactor Machine Systems Hand Pump (Platform Tilt) - Remove and Install
CB-634D Vibratory Compactor Machine Systems Cylinder (Platform Tilt) - Remove and Install
533 Wheel Feller Buncher and 543 Wheel Feller Buncher Power Train Hydraulic Tank
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer Engine Supplement Engine - Remove
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer Engine Supplement Engine - Install
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer Engine Supplement Engine Compartment Shield - Remove
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer Engine Supplement Engine Compartment Shield - Install