Steering Wheel - Remove and Install
Removal Procedure
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 145-5242 | Puller | 1 |
Start By:
- Connect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
- Apply the parking brake.
- Remove cover (2) from steering wheel (1) .
Show/hide table
 | |
| Illustration 1 | g00853542 |
- Remove nut (3) .
Show/hide table
 | |
| Illustration 2 | g00853543 |
- Remove steering wheel (1). If necessary, use Tooling (A) to remove the steering wheel.
Installation Procedure
- Install steering wheel (1) on the steering shaft by aligning the splines. Install nut (3). Tighten the nut to a torque of 37 ± 7 N·m (27 ± 5 lb ft).
Show/hide table
| | |
| Illustration 3 | g00853543 |
- Install cover (2) on steering wheel (1) .
Show/hide table
| | |
| Illustration 4 | g00853542 |
End By: Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
Caterpillar Information System:
14H and 16H Motor Graders Hydraulic and Steering System Articulation Cylinder
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System Glossary of Electrical Terms
CB-634D Vibratory Compactor Machine Systems Hydraulic Cylinder (Steering) - Remove and Install
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System Electronic Control Module (ECM) - Replace
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System Charging System
2002/01/28 Service Spools for Backhoe Valves {5051}
735 Articulated Truck Power Train Wheel Bearings and Duo-Cone Seals (Rear) - Install
735, 740 and 740 EJECTOR Articulated Trucks Machine Systems Steering Cylinder - Remove and Install
3126B Engine for Caterpillar Built Machines Speed Sensor
2002/05/27 Addition to Testing and Adjusting , "Torque Converter Stall - Test" {3101}
AS2251 Screed Mix Height Control
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks Engine Fan Control Solenoid Circuit - Test
TL2 Series In-Line Rippers Maintenance Interval Schedule
CB-634D Vibratory Compactor Machine Systems Steering Column - Remove and Install
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Cooling System
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Basic Engine
CB-634D Vibratory Compactor Machine Systems Hand Pump (Platform Tilt) - Remove and Install
CB-634D Vibratory Compactor Machine Systems Cylinder (Platform Tilt) - Remove and Install
533 Wheel Feller Buncher and 543 Wheel Feller Buncher Power Train Hydraulic Tank
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer Engine Supplement Engine - Remove
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer Engine Supplement Engine - Install
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer Engine Supplement Engine Compartment Shield - Remove
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer Engine Supplement Engine Compartment Shield - Install
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer Engine Supplement Engine Oil Cooler - Remove - Engine in Chassis