Pilot Valve (Travel) - Install
Installation Procedure
- Install travel pedal (4) into position in the cab.
Show/hide table
Illustration 1 | g00830066 |
Show/hide table
Illustration 2 | g00830068 |
- Install two bolts (5) into travel pedal (4) .
- Place the floormat into position around the travel pedal.
- Connect three hydraulic lines (2) to the bottom of pilot valve (3) .
- Connect two hydraulic lines (1) to the side of pilot valve (3) .
- Use two people to install the guard for the headlights. Install two bolts on each side of the guard. Install two bolts in the center of the guard.
Show/hide table
Illustration 3 | g00830069 |
Caterpillar Information System:
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System MID 079 - CID 0419 - FMI 03
CP-433C, CS-431C and CS-433C Paving Compactors Plate Locations and Film Locations
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System MID 079 - CID 0418 - FMI 06
PM-465 Cold Planer Engine Air Filter Secondary Element - Replace
CP-433C, CS-431C and CS-433C Paving Compactors Specifications
966G Series II and 972G Series II Wheel Loaders Engine Supplement Crankshaft Front Seal - Install - Engine in Chassis
TK1051 Track Feller Buncher Window (Side Sliding)
2001/11/19 New Clutch Discs with Improved Friction Material are Used for Improved Service Life {3030, 3160, 3187}
TL5 Series Field Cultivator Hydraulic Cylinders - Phasing
TL5 Series Field Cultivator Bearings - Lubricate
A Process is Available to Replace the Propel Lever Group{3209, 5462} A Process is Available to Replace the Propel Lever Group{3209, 5462}
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System Ride Control Accumulator - Test and Charge
966G Series II Wheel Loader and 972G Series II Wheel Loader Machine Systems Pilot Valve (Oil Manifold) - Remove
735 and 740 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Gear Pump
D7R Series II Track-Type Tractor Power Train Relief Valve (Torque Converter Inlet)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System Relief Valve (Main) - Test and Adjust
735 and 740 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Steering Cylinder
CP-563C and CS-563C Vibratory Compactors Final Drive Planetary (Drum) Oil Sample - Obtain
D7R Series II Track-Type Tractor Power Train Relief Valve (Torque Converter Outlet)
735 and 740 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Steering Cylinder
CP-433C, CS-431C and CS-433C Paving Compactors Reference Material
CP-433E, CS-423E and CS-433E Vibratory Compactors Machine Systems Articulating and Oscillating Hitch - Remove
CP-433C, CS-431C and CS-433C Paving Compactors Engine Starting with Air Inlet Heater
CP-433C, CS-431C and CS-433C Paving Compactors Engine and Machine Warm-Up