Specifications
Show/hide table
| CP-433C Padded Drum without the blade | |
| Approximate Weight | 6628 kg (14612 lb) |
| Maximum Length | 4825 mm (15.8 ft) |
| Width Across the Yoke | 1905 mm (6.3 ft) |
| Height (Top of ROPS) | 2900 mm (9.5 ft) |
Show/hide table
| CS-433C Smooth Drum without the blade | |
| Approximate Weight | 6373 kg (14050 lb) |
| Maximum Length | 4825 mm (15.8 ft) |
| Width Across the Yoke | 1905 mm (6.3 ft) |
| Height (Top of ROPS) | 2900 mm (9.5 ft) |
Show/hide table
| CS-431C Smooth Drum without the blade | |
| Approximate Weight | 6237 kg (13750 lb) |
| Maximum Length | 4825 mm (15.8 ft) |
| Width Across the Yoke | 1905 mm (6.3 ft) |
| Height (Top of ROPS) | 2900 mm (9.5 ft) |
Show/hide table
| CS-431C Asphalt Compactor | |
| Approximate Weight | 6491 kg (14310 lb) |
| Maximum Length | 4788 mm (15.7 ft) |
| Width Across the Yoke | 1850 mm (6.1 ft) |
| Height (Top of ROPS) | 2900 mm (9.5 ft) |
Note: The blade will add approximately 430 kg (948 lb). A cab will add approximately 227 kg (500 lb).
Caterpillar Information System:
966G Series II and 972G Series II Wheel Loaders Engine Supplement Crankshaft Front Seal - Install - Engine in Chassis
TK1051 Track Feller Buncher Window (Side Sliding)
2001/11/19 New Clutch Discs with Improved Friction Material are Used for Improved Service Life {3030, 3160, 3187}
TL5 Series Field Cultivator Hydraulic Cylinders - Phasing
TL5 Series Field Cultivator Bearings - Lubricate
A Process is Available to Replace the Propel Lever Group{3209, 5462} A Process is Available to Replace the Propel Lever Group{3209, 5462}
950G Series II Wheel Loader and 962G Series II Wheel Loader Electrohydraulic System Ride Control Accumulator - Test and Charge
3408E Engine Supplement for 769D Off-Highway Trucks and 771D Off-Highway Quarry Trucks Engine and Torque Converter - Install
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System MID 079 - CID 0418 - FMI 05
2001/11/26 New Control Software for the Chassis ECM is Used {7620}
TL5 Series Field Cultivator Transporting the Implement
740 and 740 EJECTOR Articulated Trucks Power Train Output Transfer Gears - Assemble
PM-465 Cold Planer Engine Air Filter Secondary Element - Replace
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System MID 079 - CID 0418 - FMI 06
CP-433C, CS-431C and CS-433C Paving Compactors Plate Locations and Film Locations
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System MID 079 - CID 0419 - FMI 03
TK1051 Track Feller Buncher Machine Systems Pilot Valve (Travel) - Install
966G Series II Wheel Loader and 972G Series II Wheel Loader Machine Systems Pilot Valve (Oil Manifold) - Remove
735 and 740 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Gear Pump
D7R Series II Track-Type Tractor Power Train Relief Valve (Torque Converter Inlet)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System Relief Valve (Main) - Test and Adjust
735 and 740 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Steering Cylinder
CP-563C and CS-563C Vibratory Compactors Final Drive Planetary (Drum) Oil Sample - Obtain
D7R Series II Track-Type Tractor Power Train Relief Valve (Torque Converter Outlet)