Illustration 1 | g01246530 |
Left Side Steering Cylinder |
Cylinder stroke ...
(1) 214-9055 Relief Valve
- Torque for the relief valve ...
28 ± 5 N·m (20.5 ± 3.5 lb ft) - Relief pressure ...
24150 ± 350 kPa (3500 ± 50 psi) - Relief pressure ...
(2) Torque on the bolt ...
Note: Replace a bolt that has been loosened or removed with a new bolt. Install the bolt with threads that are clean and free of lubricant.
(3) Diameter of the piston at the two lands on each side of the seal ...
(4) Diameter of the rod ...
(5) Bore of the cylinder ...
(6) Bore in the head ...
(7) Lubricate the sealing lip of each seal with clean hydraulic oil.
(8) Apply 7M-7456 Bearing Mount Compound to the wiper seal groove prior to assembly.
(9) Torque for the head ...
Note: Lubricate the threads on the head with clean grease.
(10) 4M-5912 Spring
- Test force ...
20 N (4.5 lb) - Test length ...
83.8 mm (3.3 inch) - Free length after test ...
92.5 mm (3.7 inch) - Outside diameter ...
9.52 mm (0.38 inch) - Test length ...
(11) Torque for the locknut ...
(12) 6E-3772 Spring
- Test force ...
85 N (19 lb) - Test length ...
28.25 mm (1.1 inch) - Free length after test ...
33.1 mm (1.3 inch) - Outside diameter ...
10 mm (0.39 inch) - Test length ...