Articulating and Oscillating Hitch - Remove
拆卸步骤
Show/hide table
| 所需工具 | |||
| 工具 | 零件号 | 零件描述 | 数量 |
| A | 180-3033 | 台架 | 2 |
| B | 138-7574 | 连杆支架 | 2 |
开始:
- 拆下钢轮。 请参阅拆解和组装, "钢轮 - 拆卸"。
- 拆下螺栓 (2) 和软管护罩 (1) 。 将软管组件 (3) 移到一旁。
Show/hide table
 | |
| 图 1 | g00833835 |
- 将螺栓 (4) 、销组件 (5) 和转向油缸 (6) 从机器两侧的摆动式铰接件 (7) 上拆下。
Show/hide table
 | |
| 图 2 | g00833836 |
- 将适当的起吊设备和工具 (B) 连接到轭 (8) 上，如图所示。 升起轭 (8) ，并将工具 (A) 从轭上拆下。 将工具 (A) 安装到机架两侧下方，然后将机架降到工具 (A) 上。
Show/hide table
 | |
| 图 3 | g00833837 |
Show/hide table
 | |
| 图 4 | g00833839 |
- 将螺栓 (9) 和盖从轭和摆动式铰接件上拆下。 将轭和摆动式铰接件作为一个整体从机器上拆下。 将轭和摆动式铰接件定位到地板上的木块上。 轭和摆动式铰接件的重量约为 825 kg (1820 lb)。
Show/hide table
 | |
| 图 5 | g00833840 |
Caterpillar Information System:
CP-433C, CS-431C and CS-433C Paving Compactors Reference Material
735 and 740 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Steering Cylinder
D7R Series II Track-Type Tractor Power Train Relief Valve (Torque Converter Outlet)
CP-563C and CS-563C Vibratory Compactors Final Drive Planetary (Drum) Oil Sample - Obtain
735 and 740 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Steering Cylinder
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System Relief Valve (Main) - Test and Adjust
D7R Series II Track-Type Tractor Power Train Relief Valve (Torque Converter Inlet)
735 and 740 Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Gear Pump
966G Series II Wheel Loader and 972G Series II Wheel Loader Machine Systems Pilot Valve (Oil Manifold) - Remove
TK1051 Track Feller Buncher Machine Systems Pilot Valve (Travel) - Install
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System MID 079 - CID 0419 - FMI 03
CP-433C, CS-431C and CS-433C Paving Compactors Plate Locations and Film Locations
CP-433C, CS-431C and CS-433C Paving Compactors Engine Starting with Air Inlet Heater
CP-433C, CS-431C and CS-433C Paving Compactors Engine and Machine Warm-Up
3408E and 3412E Engines for Caterpillar Built Machines Camshaft - Install
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train Transmission Planetary
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Hydraulic Hand Control (Loader) (Mechanically Operated)
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Hydraulic Hand Control (Loader) (Mechanically Operated)
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Hydraulic Hand Control (Loader) (Mechanically Operated)
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Handle Control (Joystick)(Loader)
966G Series II Wheel Loader and 972G Series II Wheel Loader Machine Systems Pilot Valve (Oil Manifold) - Install
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System Relief Valve (Line) - Test and Adjust
CP-433E, CS-423E and CS-433E Vibratory Compactors Machine Systems Articulating and Oscillating Hitch - Install
768C, 769C, 769D, 772B, 773B, 773D, 776C, 777B, 777D, 784B, 785, 785B, 789, 789B, 793, 793B and 793C Off-Highway Truck/Tractors and 771C, 771D and 775D Quarry Trucks Automatic Retarder Control (ARC) System Diagnostic Operation