Crankshaft Front Seal - Remove - Engine in Chassis
Removal Procedure
Start By:
- Remove the hood. Refer to Disassembly and Assembly, "Hood - Remove".
- Remove the radiator and fan group. Refer to Disassembly and Assembly, "Radiator and Fan Group - Remove".
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Relieve the tension on the belt tensioner and remove the drive belts.
- Remove six bolts (1) and the washers.
Show/hide table
Illustration 1 | g00514208 |
- Remove the following items from the end of the crankshaft: vibration damper (2), pulley (3) and adapter (4) .
- Remove eight bolts (5) .
- Separate pulley (3) and adapter (4) from vibration damper (2) .
Show/hide table
Illustration 2 | g00514209 |
- Remove nuts (7) and the washers.
Show/hide table
Illustration 3 | g00833556 |
- Remove crankshaft front seal (6) .
Caterpillar Information System:
CP-563C and CS-563C Vibratory Compactors Cab Tilting
CP-563C and CS-563C Vibratory Compactors Lifting and Tying Down the Machine
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Boom Cylinder
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader E190 Engine Overspeed Warning
TL5 Series Field Cultivator Safety Signs and Labels
CP-563C and CS-563C Vibratory Compactors Engine and Machine Warm-Up
CP-563C and CS-563C Vibratory Compactors Engine Starting with Jump Start Cables
SR4 Generator with VR3 or VR4 Voltage Regulator Troubleshooting
SR4 Generator with VR3 or VR4 Voltage Regulator Service Tools
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System MID 079 - CID 0346 - FMI 03
SR4 Generator with VR3 or VR4 Voltage Regulator General Information
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Stabilizer Cylinder
SR4 Generator with VR3 or VR4 Voltage Regulator Rotating Rectifier - Test
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Boom Cylinder
Disassembly and Assembly of the Water Pump on the 3524B Engine{1361} Disassembly and Assembly of the Water Pump on the 3524B Engine{1361}
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System MID 079 - CID 0346 - FMI 05
2001/10/15 Proper Adjustment of the Kickout Positioner Improves Reliability {5109, 5112}
2001/11/19 New Protective Caps For Hose Clamps Are Now Available {5057}
3408E and 3412E Engines for Caterpillar Built Machines Camshaft - Remove
768C, 769C, 769D, 772B, 773B, 773D, 776C, 777B, 777D, 784B, 785, 785B, 789, 789B, 793, 793B and 793C Off-Highway Truck/Tractors and 771C, 771D and 775D Quarry Trucks Automatic Retarder Control (ARC) System Pressure Switch (Retarder)
735, 740 and 740 EJECTOR Articulated Trucks Machine Systems Gear Pump (Hoist) - Remove
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Hydraulic and Steering System Boom Cylinder
768C, 769C, 769D, 772B, 773B, 773D, 776C, 777B, 777D, 784B, 785, 785B, 789, 789B, 793, 793B and 793C Off-Highway Truck/Tractors and 771C, 771D and 775D Quarry Trucks Automatic Retarder Control (ARC) System Pressure Switch (Automatic Retarder)
735, 740 and 740 EJECTOR Articulated Trucks Machine Systems Gear Pump (Hoist) - Install