New Protective Caps For Hose Clamps Are Now Available {5057}
- Caterpillar Products:
- All
Show/hide table
 | |
| Illustration 1 | g00831484 |
New protective caps for hose clamps are now available. The new caps provide protection from the sharp edges and corners of the hose clamps. The new caps are for use on the constant torque hose clamps. Refer to the following Table for the correct part numbers:
Show/hide table
| Part Number | Width of Clamp |
| 211-8071 | 8 mm (5/16 inch) |
| 148-2786 | 12.7 mm (1/2 inch) |
| 211-8073 | 16 mm (5/8 inch) |
The new protective caps slide onto the exposed end of the hose clamp. Refer to Illustration 1.
Caterpillar Information System:
2001/10/15 Proper Adjustment of the Kickout Positioner Improves Reliability {5109, 5112}
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System MID 079 - CID 0346 - FMI 05
Disassembly and Assembly of the Water Pump on the 3524B Engine{1361} Disassembly and Assembly of the Water Pump on the 3524B Engine{1361}
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Boom Cylinder
SR4 Generator with VR3 or VR4 Voltage Regulator Rotating Rectifier - Test
966G Series II and 972G Series II Wheel Loaders Engine Supplement Crankshaft Front Seal - Remove - Engine in Chassis
CP-563C and CS-563C Vibratory Compactors Cab Tilting
CP-563C and CS-563C Vibratory Compactors Lifting and Tying Down the Machine
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Boom Cylinder
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader E190 Engine Overspeed Warning
TL5 Series Field Cultivator Safety Signs and Labels
CP-563C and CS-563C Vibratory Compactors Engine and Machine Warm-Up
3408E and 3412E Engines for Caterpillar Built Machines Camshaft - Remove
768C, 769C, 769D, 772B, 773B, 773D, 776C, 777B, 777D, 784B, 785, 785B, 789, 789B, 793, 793B and 793C Off-Highway Truck/Tractors and 771C, 771D and 775D Quarry Trucks Automatic Retarder Control (ARC) System Pressure Switch (Retarder)
735, 740 and 740 EJECTOR Articulated Trucks Machine Systems Gear Pump (Hoist) - Remove
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Hydraulic and Steering System Boom Cylinder
768C, 769C, 769D, 772B, 773B, 773D, 776C, 777B, 777D, 784B, 785, 785B, 789, 789B, 793, 793B and 793C Off-Highway Truck/Tractors and 771C, 771D and 775D Quarry Trucks Automatic Retarder Control (ARC) System Pressure Switch (Automatic Retarder)
735, 740 and 740 EJECTOR Articulated Trucks Machine Systems Gear Pump (Hoist) - Install
735, 740 and 740 EJECTOR Articulated Trucks Machine Systems Piston Pump (Steering) - Remove
CP-563D, CS-563D, CS-573D and CS-583D Paving Compactors Final Drive Planetary (Drum) Oil - Check
CP-563D, CS-563D, CS-573D and CS-583D Paving Compactors Stopping the Engine if an Electrical Malfunction Occurs
735, 740 and 740 EJECTOR Articulated Trucks Machine Systems Piston Pump (Steering) - Install
Topcon® System Five Part Number Location
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System MID 079 - CID 0346 - FMI 06