Hook Winch Motor - Install
Installation Procedure
Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary.
- Use straps and a suitable lifting device in order to move hook winch motor (6) into the correct position. The weight of the hook winch motor is approximately 52 kg (115 lb).
Show/hide table
Illustration 1 | g00803877 |
- Install bolts (14) .
Show/hide table
Illustration 2 | g00803879 |
- Install cover assembly (13) .
Show/hide table
Illustration 3 | g00803865 |
- Connect hose assemblies (12) and (11) to the bottom of the hook winch motor.
Show/hide table
Illustration 4 | g00803218 |
The view is from the bottom of the hook winch motor. |
- Connect hose assembly (10) to the hook winch motor.
Show/hide table
Illustration 5 | g00803214 |
- Connect hose assemblies (9), (8), and (7) to hook winch motor (6) .
Show/hide table
Illustration 6 | g00803210 |
- Install guard (5) .
Show/hide table
Illustration 7 | g00803205 |
- Install guard (4) and bracket (3) .
Show/hide table
Illustration 8 | g00803197 |
- Install plate (2) and guard (1) .
Show/hide table
Illustration 9 | g00803182 |
End By: Disengage the locking device for the counterweight. Refer to Operation and Maintenance ManualSEBU7085-01, "Counterweight Lock Lever" for the correct procedure.
Caterpillar Information System:
561M Pipelayer Hook Winch Motor - Remove
2001/07/23 Wear Limits for the Mounts for the Rear Suspension {7203, 7207}
2003/06/30 New Backup Rings Are Available for Sealing Hydraulic Cylinders with Pitted Grooves {4303, 5102, 5104, 5106, 5456, 7562}
784C, 785C, 785D, 789C, 789D, 793C and 793D Off-Highway Trucks Power Train Electronic Control System MID 027 - CID 0378 - FMI 06
2001/06/11 Correction to Disassembly and Assembly, SENR1206-01 , "Assemble Differential (Rear)" {3258, 3259, 3260, 3278}
784C, 785C, 785D, 789C, 789D, 793C and 793D Off-Highway Trucks Power Train Electronic Control System MID 027 - CID 0378 - FMI 05
216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B and 268B Skid Steer Loaders Roading the Machine
561M Pipelayer Hook Winch - Install
735 Articulated Truck Power Train Pump Drive - Disassemble - The No. 1 Rotating Clutch is included.
2001/06/11 Repositioning the Hoses for the Ejector Bucket will Improve the Service Life of the Hoses {5057}
320C and 322C Forest Machines Hydraulic System Main Hydraulic System
2001/06/11 Revision to Systems Operation, Testing and Adjusting"Transmission Neutralizer Pressure Test" {3191, 4269}
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head (CABS) Hydraulic System Feed Roller Motor Speed - Test and Adjust
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head (CABS) Hydraulic System Feed Roller Motor Back Pressure - Test and Adjust
784C, 785C, 785D, 789C, 789D, 793C and 793D Off-Highway Trucks Power Train Electronic Control System Using Caterpillar Electronic Technician to Determine Diagnostic Codes
784C, 785C, 785D, 789C, 789D, 793C and 793D Off-Highway Trucks Power Train Electronic Control System Diagnostic Code List
2001/06/25 Correction to the Testing and Adjusting Procedure for the Pilot Accumulator {5077}
2001/06/18 Correction to Operation and Maintenance Manual, SEBU7468-01 for the Automatic Level Control Switch {1435}
784C, 785C, 785D, 789C, 789D, 793C and 793D Off-Highway Trucks Power Train Electronic Control System General Information
69D, 769D, 773D, 773E, 776D and 777D Off-Highway Trucks and 771D, 775D and 775E Quarry Trucks Power Train Electronic Control System Power Supply Circuit of Electronic Control Module
3176C and 3196 Engines for Caterpillar Built Machines Engine Speed/Timing Sensor - Calibrate
735, 740 and 740 EJECTOR Articulated Trucks Braking System Slack Adjuster
Installation of Film Kits on Skid Steer Loaders{7557} Installation of Film Kits on Skid Steer Loaders{7557}
735, 740 and 740 EJECTOR Articulated Trucks Braking System Service Brake Wear Indicator - Check