Correction to Operation and Maintenance Manual, SEBU7468-01 for the Automatic Level Control Switch {1435}
- Skid Steer Loader:
- 216 (S/N: 4NZ1-UP)
- 226 (S/N: 5FZ1-UP)
- 228 (S/N: 6BZ1-UP)
- 236 (S/N: 4YZ1-UP)
- 246 (S/N: 5SZ1-UP)
- 248 (S/N: 6LZ1-UP)
- 252 (S/N: FDG1-UP)
- 262 (S/N: CED1-UP)
Automatic Level Control (If Equipped)
Show/hide table
 | |
| Illustration 1 | g00560325 |
Automatic Level Control Switch | |
The automatic leveling switch is located on the left control panel. The automatic leveling system maintains the selected angle of the work tool as the loader lift arms are raised. The automatic leveling system does not maintain the selected angle of the work tool as the loader lift arms are lowered.
Automatic Leveling - Push on the bottom of the automatic leveling switch in order to engage the automatic leveling function. Push on the top of the switch in order to disengage the automatic leveling function.
Caterpillar Information System:
2001/06/25 Correction to the Testing and Adjusting Procedure for the Pilot Accumulator {5077}
784C, 785C, 785D, 789C, 789D, 793C and 793D Off-Highway Trucks Power Train Electronic Control System Diagnostic Code List
784C, 785C, 785D, 789C, 789D, 793C and 793D Off-Highway Trucks Power Train Electronic Control System Using Caterpillar Electronic Technician to Determine Diagnostic Codes
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head (CABS) Hydraulic System Feed Roller Motor Back Pressure - Test and Adjust
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head (CABS) Hydraulic System Feed Roller Motor Speed - Test and Adjust
561M Pipelayer Hook Winch Motor - Install
561M Pipelayer Hook Winch Motor - Remove
2001/07/23 Wear Limits for the Mounts for the Rear Suspension {7203, 7207}
2003/06/30 New Backup Rings Are Available for Sealing Hydraulic Cylinders with Pitted Grooves {4303, 5102, 5104, 5106, 5456, 7562}
784C, 785C, 785D, 789C, 789D, 793C and 793D Off-Highway Trucks Power Train Electronic Control System MID 027 - CID 0378 - FMI 06
2001/06/11 Correction to Disassembly and Assembly, SENR1206-01 , "Assemble Differential (Rear)" {3258, 3259, 3260, 3278}
784C, 785C, 785D, 789C, 789D, 793C and 793D Off-Highway Trucks Power Train Electronic Control System MID 027 - CID 0378 - FMI 05
784C, 785C, 785D, 789C, 789D, 793C and 793D Off-Highway Trucks Power Train Electronic Control System General Information
69D, 769D, 773D, 773E, 776D and 777D Off-Highway Trucks and 771D, 775D and 775E Quarry Trucks Power Train Electronic Control System Power Supply Circuit of Electronic Control Module
3176C and 3196 Engines for Caterpillar Built Machines Engine Speed/Timing Sensor - Calibrate
735, 740 and 740 EJECTOR Articulated Trucks Braking System Slack Adjuster
Installation of Film Kits on Skid Steer Loaders{7557} Installation of Film Kits on Skid Steer Loaders{7557}
735, 740 and 740 EJECTOR Articulated Trucks Braking System Service Brake Wear Indicator - Check
PF-300B and PS-300B Pneumatic Compactors Battery - Clean/Check
PF-300B and PS-300B Pneumatic Compactors Compaction and Rolling Procedure
320C and 322C Forest Machines Hydraulic System Main Control Valve
735, 740 and 740 EJECTOR Articulated Trucks Engine Supplement Refrigerant Compressor - Remove and Install
784C, 785C, 785D, 789C, 789D, 793C and 793D Off-Highway Trucks Power Train Electronic Control System Indicators
3176C and 3196 Engines for Caterpillar Built Machines Diagnostic Codes