Hook Winch - Install
Installation Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
(A)     | 6V-6146     | Load Leveler     | 1     |
Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary.
- Attach a strap and a suitable lifting device to the winch drum (19). The combined weight of the hook winch and the hook winch motor is approximately 567 kg (1250 lb).
Show/hide table
Illustration 1 | g00803684 |
- Move hook winch (14) into the position that is shown in Illustration 2. Lower the hook winch onto the cribbing.
Show/hide table
Illustration 2 | g00803687 |
- Use Tool (A), straps, and an appropriate lifting device in order to move hook winch (14) into the original position.
Note: Illustration 4 shows the appropriate location to attach a strap to hook winch motor (6) .
Show/hide table
Illustration 3 | g00803616 |
Show/hide table
Illustration 4 | g00803625 |
- Install two mounting bolts (18). Repeat for the other side of the hook winch.
Show/hide table
Illustration 5 | g00803230 |
- Connect hose assemblies (17), (16), and (15) to hook winch (14) .
Show/hide table
Illustration 6 | g00803227 |
- Connect hose assembly (13) to hook winch (14) .
Show/hide table
Illustration 7 | g00803222 |
The view is from the bottom of the hook winch motor. |
- Connect hose assemblies (12) and (11) to the bottom of the hook winch motor.
Show/hide table
Illustration 8 | g00803218 |
The view is from the bottom of the hook winch motor. |
- Connect hose assembly (10) to the hook winch motor.
Show/hide table
Illustration 9 | g00803214 |
- Connect hose assemblies (9), (8), and (7) to hook winch motor (6) .
Show/hide table
Illustration 10 | g00803210 |
- Install guard (5) .
Show/hide table
Illustration 11 | g00803205 |
- Install guard (4) and bracket (3) .
Show/hide table
Illustration 12 | g00803197 |
- Install plate (2) and guard (1) .
Show/hide table
Illustration 13 | g00803182 |
End By:
- Disengage the locking device for the counterweight. Refer to Operation and Maintenance ManualSEBU7085-01, "Counterweight Lock Lever" for the correct procedure.
- Install the cable for the hook winch. See Disassembly and Assembly, "Hook Winch Cable - Remove and Install".
Caterpillar Information System:
735 Articulated Truck Power Train Pump Drive - Disassemble - The No. 1 Rotating Clutch is included.
2001/06/11 Repositioning the Hoses for the Ejector Bucket will Improve the Service Life of the Hoses {5057}
320C and 322C Forest Machines Hydraulic System Main Hydraulic System
2001/06/11 Revision to Systems Operation, Testing and Adjusting"Transmission Neutralizer Pressure Test" {3191, 4269}
784C, 785C, 785D, 789C, 789D, 793C and 793D Off-Highway Trucks Power Train Electronic Control System MID 027 - CID 0378 - FMI 03
2001/06/11 Revision to Specification , "Neutralizer Switch Assembly Adjustment" {3191, 4269}
2001/07/02 Procedure For the Pipelayer Boom Kickout Adjustment {6301}
784C, 785C, 785D, 789C, 789D, 793C and 793D Off-Highway Trucks Power Train Electronic Control System MID 027 - CID 1326 - FMI 02
CP-663E, CS-663E and CS-683E Vibratory Compactors Machine Systems Wheel and Tire - Remove and Install
CP-663E, CS-663E and CS-683E Vibratory Compactors Machine Systems Piston Motor (Axle Propel) - Assemble
CP-663E, CS-663E and CS-683E Vibratory Compactors Machine Systems Piston Motor (Axle Propel) - Disassemble
CP-663E, CS-663E and CS-683E Vibratory Compactors Machine Systems Piston Motor (Axle Propel) - Install
216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B and 268B Skid Steer Loaders Roading the Machine
784C, 785C, 785D, 789C, 789D, 793C and 793D Off-Highway Trucks Power Train Electronic Control System MID 027 - CID 0378 - FMI 05
2001/06/11 Correction to Disassembly and Assembly, SENR1206-01 , "Assemble Differential (Rear)" {3258, 3259, 3260, 3278}
784C, 785C, 785D, 789C, 789D, 793C and 793D Off-Highway Trucks Power Train Electronic Control System MID 027 - CID 0378 - FMI 06
2003/06/30 New Backup Rings Are Available for Sealing Hydraulic Cylinders with Pitted Grooves {4303, 5102, 5104, 5106, 5456, 7562}
2001/07/23 Wear Limits for the Mounts for the Rear Suspension {7203, 7207}
561M Pipelayer Hook Winch Motor - Remove
561M Pipelayer Hook Winch Motor - Install
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head (CABS) Hydraulic System Feed Roller Motor Speed - Test and Adjust
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head (CABS) Hydraulic System Feed Roller Motor Back Pressure - Test and Adjust
784C, 785C, 785D, 789C, 789D, 793C and 793D Off-Highway Trucks Power Train Electronic Control System Using Caterpillar Electronic Technician to Determine Diagnostic Codes
784C, 785C, 785D, 789C, 789D, 793C and 793D Off-Highway Trucks Power Train Electronic Control System Diagnostic Code List