Revision to Specification , "Neutralizer Switch Assembly Adjustment" {3191, 4269}
- Load Haul Dump (LHD):
- R1300 (S/N: 6QW)
The information on page 8 has been revised. The information on page 8 refers to the setting for the brake pressure once the transmission neutralizer has been activated. The revised information follows.
Setting for brake pressure for the transmission neutralizer ... 1035 ± 140 kPa (150 ± 20 psi)
Caterpillar Information System:
2001/07/02 Procedure For the Pipelayer Boom Kickout Adjustment {6301}
784C, 785C, 785D, 789C, 789D, 793C and 793D Off-Highway Trucks Power Train Electronic Control System MID 027 - CID 1326 - FMI 02
CP-663E, CS-663E and CS-683E Vibratory Compactors Machine Systems Wheel and Tire - Remove and Install
CP-663E, CS-663E and CS-683E Vibratory Compactors Machine Systems Piston Motor (Axle Propel) - Assemble
CP-663E, CS-663E and CS-683E Vibratory Compactors Machine Systems Piston Motor (Axle Propel) - Disassemble
CP-663E, CS-663E and CS-683E Vibratory Compactors Machine Systems Piston Motor (Axle Propel) - Install
CP-663E, CS-663E and CS-683E Vibratory Compactors Machine Systems Piston Motor (Axle Propel) - Remove
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head (CABS) Hydraulic System Saw Bar Cylinder Return Speed - Test and Adjust
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head (CABS) Hydraulic System Measuring Arm Cylinder Pressure - Test and Adjust
735, 740 and 740 EJECTOR Articulated Trucks Braking System Brake Accumulator (Parking)
797 Off-Highway Truck Steering System Center Arm (Steering) - Adjust
CS-663E, CP-663E and CS-683E Vibratory Compactors Engine Supplement Fuel Tank - Remove and Install
784C, 785C, 785D, 789C, 789D, 793C and 793D Off-Highway Trucks Power Train Electronic Control System MID 027 - CID 0378 - FMI 03
2001/06/11 Revision to Systems Operation, Testing and Adjusting"Transmission Neutralizer Pressure Test" {3191, 4269}
320C and 322C Forest Machines Hydraulic System Main Hydraulic System
2001/06/11 Repositioning the Hoses for the Ejector Bucket will Improve the Service Life of the Hoses {5057}
735 Articulated Truck Power Train Pump Drive - Disassemble - The No. 1 Rotating Clutch is included.
561M Pipelayer Hook Winch - Install
216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B and 268B Skid Steer Loaders Roading the Machine
784C, 785C, 785D, 789C, 789D, 793C and 793D Off-Highway Trucks Power Train Electronic Control System MID 027 - CID 0378 - FMI 05
2001/06/11 Correction to Disassembly and Assembly, SENR1206-01 , "Assemble Differential (Rear)" {3258, 3259, 3260, 3278}
784C, 785C, 785D, 789C, 789D, 793C and 793D Off-Highway Trucks Power Train Electronic Control System MID 027 - CID 0378 - FMI 06
2003/06/30 New Backup Rings Are Available for Sealing Hydraulic Cylinders with Pitted Grooves {4303, 5102, 5104, 5106, 5456, 7562}
2001/07/23 Wear Limits for the Mounts for the Rear Suspension {7203, 7207}