Revision to Systems Operation, Testing and Adjusting"Transmission Neutralizer Pressure Test" {3191, 4269}
- Load Haul Dump (LHD):
- R1300 (S/N: 6QW)
The information in Step 7 on page 46 for the pressure test for the transmission neutralizer has been revised. The revised information follows.
- While the engine is running and the oil for the accumulator is at full pressure, depress the brake pedal on the left hand side until the pressure on the gauge reads 1035 ± 140 kPa (150 ± 20 psi). At this pressure, the ohmmeter should now indicate an open circuit condition. An audible "click" should be heard. The "click" indicates that the switch has been actuated.
Caterpillar Information System:
784C, 785C, 785D, 789C, 789D, 793C and 793D Off-Highway Trucks Power Train Electronic Control System MID 027 - CID 0378 - FMI 03
2001/06/11 Revision to Specification , "Neutralizer Switch Assembly Adjustment" {3191, 4269}
2001/07/02 Procedure For the Pipelayer Boom Kickout Adjustment {6301}
784C, 785C, 785D, 789C, 789D, 793C and 793D Off-Highway Trucks Power Train Electronic Control System MID 027 - CID 1326 - FMI 02
CP-663E, CS-663E and CS-683E Vibratory Compactors Machine Systems Wheel and Tire - Remove and Install
CP-663E, CS-663E and CS-683E Vibratory Compactors Machine Systems Piston Motor (Axle Propel) - Assemble
CP-663E, CS-663E and CS-683E Vibratory Compactors Machine Systems Piston Motor (Axle Propel) - Disassemble
CP-663E, CS-663E and CS-683E Vibratory Compactors Machine Systems Piston Motor (Axle Propel) - Install
CP-663E, CS-663E and CS-683E Vibratory Compactors Machine Systems Piston Motor (Axle Propel) - Remove
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head (CABS) Hydraulic System Saw Bar Cylinder Return Speed - Test and Adjust
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head (CABS) Hydraulic System Measuring Arm Cylinder Pressure - Test and Adjust
735, 740 and 740 EJECTOR Articulated Trucks Braking System Brake Accumulator (Parking)
320C and 322C Forest Machines Hydraulic System Main Hydraulic System
2001/06/11 Repositioning the Hoses for the Ejector Bucket will Improve the Service Life of the Hoses {5057}
735 Articulated Truck Power Train Pump Drive - Disassemble - The No. 1 Rotating Clutch is included.
561M Pipelayer Hook Winch - Install
216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B and 268B Skid Steer Loaders Roading the Machine
784C, 785C, 785D, 789C, 789D, 793C and 793D Off-Highway Trucks Power Train Electronic Control System MID 027 - CID 0378 - FMI 05
2001/06/11 Correction to Disassembly and Assembly, SENR1206-01 , "Assemble Differential (Rear)" {3258, 3259, 3260, 3278}
784C, 785C, 785D, 789C, 789D, 793C and 793D Off-Highway Trucks Power Train Electronic Control System MID 027 - CID 0378 - FMI 06
2003/06/30 New Backup Rings Are Available for Sealing Hydraulic Cylinders with Pitted Grooves {4303, 5102, 5104, 5106, 5456, 7562}
2001/07/23 Wear Limits for the Mounts for the Rear Suspension {7203, 7207}
561M Pipelayer Hook Winch Motor - Remove
561M Pipelayer Hook Winch Motor - Install