Power Actuator (Power Train Guard) - Remove and Install
Start By:
- Connect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
- Remove four bolts (1) and the washers.
Show/hide table
Illustration 2 g00747933 - Open access door (2).
Show/hide table
Illustration 3 g00751274 - Use toggle switch (3) in order to lower the power train guard. Place a suitable floor jack under the power train guard in order to support the weight of the power train guard.
Show/hide table
Illustration 4 g00751285 - Remove cotter pin (4) and the pin.
Show/hide table
Illustration 5 g00751276 - Remove six bolts (5) and the washers.
- Remove guard (6).
Show/hide table
Illustration 6 g00751281 - Remove three bolts (7) and the washers.
- Remove guard (8).
Show/hide table
Illustration 7 g00751283 - Remove cotter pin (9) and the pin.
- Cut two wire ties (12) and disconnect electrical connector (11).
- Carefully remove power actuator (10).
Show/hide table
Illustration 1 | g00751271 |
- Carefully install power actuator (10). Install pin (9) and the cotter pin.
- Connect electrical connector (11). Install two wire ties (12).
Show/hide table
Illustration 9 g00751285 - Install pin (4) and cotter pin.
Show/hide table
Illustration 10 g00751281 - Install guard (8).
- Install three bolts (7) and the washers.
Show/hide table
Illustration 11 g00751276 - Install guard (6).
- Install six bolts (5) and the washers.
Show/hide table
Illustration 12 g00751274 - Use toggle switch (3) in order to raise the power train guard.
Show/hide table
Illustration 13 g00747933 - Close access door (2).
Show/hide table
Illustration 14 g00751271 - Install four bolts (1) and the washers.
Show/hide table
Illustration 8 | g00751283 |
End By:
- Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
Caterpillar Information System:
424D, 428D and 438D Backhoe Loaders Belts - Inspect/Adjust/Replace
938G Wheel Loader and IT38G Integrated Toolcarrier Engine Supplement Alternator - Remove and Install
793B Off-Highway Truck Power Train Lockup Clutch and Synchronizing Valve (Torque Converter)
836G Landfill Compactor and 834G Wheel Dozer Power Train Crankcase Guard (Rear) - Remove and Install
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head (CABS) Lock Pin (Saw Bar Tensioner) - Inspect/Replace
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head (CABS) Lubrication System Oil Level - Check
3406E and 3456 Engines for Caterpillar Built Machines Fuel Transfer Pump
836G Landfill Compactor and 834G Wheel Dozer Power Train Crankcase Guard (Front) - Remove and Install
IT62G Series II Integrated Toolcarrier and 950G Series II and 962G Series II Wheel Loaders Battery Disconnect Switch
836G Landfill Compactor and 834G Wheel Dozer Power Train Power Actuator (Crankcase Guard) - Remove and Install
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head (CABS) Saw Chain Lubrication System - Inspect/Adjust
793B Off-Highway Truck Power Train Torque Converter Inlet and Outlet Relief Valves
793B Off-Highway Truck Power Train Gear Pump (Transmission and Brake Cooling)
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Cylinder Head
938G Wheel Loader and IT38G Integrated Toolcarrier Engine Supplement Electric Starting Motor - Remove and Install
3406E and 3456 Engines for Caterpillar Built Machines Cylinder Head Valves
2001/02/19 Special Instruction, REHS0911 , "Salvage Procedure for the Bore for the Idler Gear Bearing in the Output Transfer Gear Group" is now Available {3159}
793B Off-Highway Truck Power Train Oil Filter (Transmission Charging)
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Machine Systems Cab - Install
G3304 and G3306 Engines Flywheel Housing - Inspect
HP750 Processor Head Saw Unit
793B Off-Highway Truck Power Train Oil Filter (Transmission Lubrication)
836G Landfill Compactor and 834G Wheel Dozer Power Train Axle Guards (Front) - Remove and Install
793B Off-Highway Truck Power Train Oil Cooler (Transmission)