2000/09/04 Caterpillar


Pilot Valves Now Have Serviceable O-Rings and Seals {4342}

Usage:

R2900 5TW
Load Haul Dump (LHD):
R1300 (PIN: 6QW)
R1600 (PIN: 9EW)
R1700G (PIN: 8XZ)
R2900 (PIN: BAR; 5TW)

Description of Change: The serviceable parts list for the pilot valve has been revised. The serviceable parts list will now include all O-rings and seals.

Adaptable To: The revised parts list for the 143-2855 Pilot Valve is adaptable to the following machines: R1300 (PIN: 6QW1-UP), R1600 (PIN: 9EW1-UP), R1700G (PIN: 8XZ1-UP), R2900–162 and Up and R2900 (PIN: 5TW1-UP). Refer to Table 1 and Illustration 1 for the revised list.

Table 1
Service Parts for the 143-2855 Pilot Valve    
Item     Qty     Part Number     Description    
1     1     104-4272     Boot    
2     1     104-4273     Boot Clamp    
3     1     104-4256     Bracket    
4     1     104-4255     Handle    
5     2     104-4270     Connecting Link    
6     1     9F-6641     Bolt    
7     1     104-4274     Spacer    
8     1     104-4271     Dowel    
9     2     8M-6802     Hex Socket Screw    
10     2     147-1238     Pilot Cartridge Valve (1)    
11     1     103-6319         Shim (1)    
12     1     103-6318         Shim (1)    
13     1     095-1519         O-Ring Seal (1)    
14     1     6V-5758         O-Ring Seal (1)    
15     1     6E-0770         Backup Ring (1)    
16     2     147-1237     Pilot Cartridge Valve    
( 1 ) Each 147-1238 Pilot Cartridge Valve includes Items 11 through 15.



Illustration 1g00738536

Caterpillar Information System:

2000/09/04 Additional Plugs for the Collets Are Now Available {4303, 5305, 6107, 7000}
CP-663E, CS-663E and CS-683E Vibratory Compactors Battery Disconnect Switch
Caterpillar Monitoring System MID 030 - CID 0428 - FMI 08
527 Track-Type Skidder Engine Supplement Muffler and Exhaust Extension - Remove and Install
3512 and 3516 EUI Engines for Caterpillar Built Machines Electronic Circuits
IT62G Series II Integrated Toolcarrier Diagnostic Codes (Caterpillar Monitoring System)
527 Track-Type Skidder Engine Supplement Hood - Remove and Install
Caterpillar Monitoring System MID 030 - CID 0427 - FMI 08
527 Track-Type Skidder Engine Supplement Air Cleaner - Remove and Install
725 and 730 Articulated Trucks Rollover Protective Structure (ROPS) - Inspect
C-9 Engines for Caterpillar Built Machines Cylinder Block Cover Group
IT62G Series II Integrated Toolcarrier Warning Categories (Caterpillar Monitoring System)
527 Track-Type Skidder Engine Supplement Alternator - Remove and Install
IT62G Series II Integrated Toolcarrier Indicators
Caterpillar Monitoring System MID 030 - CID 0826 - FMI 08
2000/09/04 A Special Instruction Is Available for Installing New Wiring Harnesses on Harvester Heads {5734}
TH62, TH63, TH82 and TH83 Telehandlers Steering System Piston Pump (Implement and Steering)
725 and 730 Articulated Trucks Window Washer Reservoir - Fill
Caterpillar Monitoring System Quad Gauge Module
C-10, C-12, C-15 and C-16 Industrial Engines Diagnostic Codes
527 Track-Type Skidder Engine Supplement Turbocharger - Remove and Install
2000/09/25 The Piston Pump (Propel) and the Piston Pump (Vibratory) have Changed {5070}
2001/01/08 Replacement of Support Blocks for the Rear Axle and the Center Axle A-Frames Covered in Special Instruction, REHS0931 {3278, 7051}
C-9 Engines for Caterpillar Built Machines Electric Starting Motor
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.