Battery Disconnect Switch
Show/hide table
 | |
| Illustration 1 | g00738258 |
The battery disconnect switch is located at the rear of the machine on the right side.
Show/hide table
| OFF - In order to deactivate the electrical system, turn the switch to the OFF position (1). |
Show/hide table
| ON - To activate the electrical system, insert the key and turn the switch in a clockwise direction. The switch must be in the ON position (2) in order to start the engine. |
The functions of the battery disconnect switch and the engine start switch are different. When the battery disconnect switch is turned to the OFF position, the entire electrical system is disabled. When the engine start switch is turned to the OFF position, the battery remains connected to the electrical system.
Remove the key when you exit the machine overnight or when you exit the machine for an extended period of time. Also, remove the key when you service the electrical system.
Show/hide table
| NOTICE |
|---|
Never move the battery disconnect switch to the OFF position while the engine is operating. Serious damage to the electrical system could result. |
Caterpillar Information System:
Caterpillar Monitoring System MID 030 - CID 0428 - FMI 08
527 Track-Type Skidder Engine Supplement Muffler and Exhaust Extension - Remove and Install
3512 and 3516 EUI Engines for Caterpillar Built Machines Electronic Circuits
IT62G Series II Integrated Toolcarrier Diagnostic Codes (Caterpillar Monitoring System)
527 Track-Type Skidder Engine Supplement Hood - Remove and Install
Caterpillar Monitoring System MID 030 - CID 0427 - FMI 08
527 Track-Type Skidder Engine Supplement Air Cleaner - Remove and Install
725 and 730 Articulated Trucks Rollover Protective Structure (ROPS) - Inspect
C-9 Engines for Caterpillar Built Machines Cylinder Block Cover Group
IT62G Series II Integrated Toolcarrier Warning Categories (Caterpillar Monitoring System)
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Axles, Differential and Brakes Visual Inspection
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-1050B andBarber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-245C Asphalt Pavers Propel System Piston Pump Neutral - Test and Adjust
2000/09/04 Additional Plugs for the Collets Are Now Available {4303, 5305, 6107, 7000}
2000/09/04 Pilot Valves Now Have Serviceable O-Rings and Seals {4342}
527 Track-Type Skidder Engine Supplement Alternator - Remove and Install
IT62G Series II Integrated Toolcarrier Indicators
Caterpillar Monitoring System MID 030 - CID 0826 - FMI 08
2000/09/04 A Special Instruction Is Available for Installing New Wiring Harnesses on Harvester Heads {5734}
TH62, TH63, TH82 and TH83 Telehandlers Steering System Piston Pump (Implement and Steering)
725 and 730 Articulated Trucks Window Washer Reservoir - Fill
Caterpillar Monitoring System Quad Gauge Module
C-10, C-12, C-15 and C-16 Industrial Engines Diagnostic Codes
527 Track-Type Skidder Engine Supplement Turbocharger - Remove and Install
2000/09/25 The Piston Pump (Propel) and the Piston Pump (Vibratory) have Changed {5070}