Muffler and Exhaust Extension - Remove and Install
Removal Procedure
- Remove bolts (1) and screens (2) and (3) .
Show/hide table
 | |
| Illustration 1 | g00730495 |
- Remove bolts (4) and remove the muffler.
Show/hide table
 | |
| Illustration 2 | g00730496 |
Installation Procedure
- Put the muffler in position. Install bolts (4) .
Show/hide table
| | |
| Illustration 3 | g00730496 |
- Put screens (2) and (3) in position. Install bolts (1) .
Show/hide table
| | |
| Illustration 4 | g00730495 |
Caterpillar Information System:
3512 and 3516 EUI Engines for Caterpillar Built Machines Electronic Circuits
IT62G Series II Integrated Toolcarrier Diagnostic Codes (Caterpillar Monitoring System)
527 Track-Type Skidder Engine Supplement Hood - Remove and Install
Caterpillar Monitoring System MID 030 - CID 0427 - FMI 08
527 Track-Type Skidder Engine Supplement Air Cleaner - Remove and Install
725 and 730 Articulated Trucks Rollover Protective Structure (ROPS) - Inspect
C-9 Engines for Caterpillar Built Machines Cylinder Block Cover Group
IT62G Series II Integrated Toolcarrier Warning Categories (Caterpillar Monitoring System)
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Axles, Differential and Brakes Visual Inspection
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-1050B andBarber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-245C Asphalt Pavers Propel System Piston Pump Neutral - Test and Adjust
IT62G Series II Integrated Toolcarrier Functional Test (Caterpillar Monitoring System)
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-1050B andBarber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-245C Asphalt Pavers Propel System Relief Valve (Charge) - Test and Adjust
Caterpillar Monitoring System MID 030 - CID 0428 - FMI 08
CP-663E, CS-663E and CS-683E Vibratory Compactors Battery Disconnect Switch
2000/09/04 Additional Plugs for the Collets Are Now Available {4303, 5305, 6107, 7000}
2000/09/04 Pilot Valves Now Have Serviceable O-Rings and Seals {4342}
527 Track-Type Skidder Engine Supplement Alternator - Remove and Install
IT62G Series II Integrated Toolcarrier Indicators
Caterpillar Monitoring System MID 030 - CID 0826 - FMI 08
2000/09/04 A Special Instruction Is Available for Installing New Wiring Harnesses on Harvester Heads {5734}
TH62, TH63, TH82 and TH83 Telehandlers Steering System Piston Pump (Implement and Steering)
725 and 730 Articulated Trucks Window Washer Reservoir - Fill
Caterpillar Monitoring System Quad Gauge Module
C-10, C-12, C-15 and C-16 Industrial Engines Diagnostic Codes