2001/01/08 Caterpillar


Replacement of Support Blocks for the Rear Axle and the Center Axle A-Frames Covered in Special Instruction, REHS0931 {3278, 7051}

Usage:

D250E II 4PS
Articulated Truck:
D250D (S/N: 6NG1-UP)
D250E (S/N: 5TN1-UP)
D300E (S/N: 7FN1-UP)
D250E Series II (S/N: 4PS1-UP)
D300E Series II (S/N: 5KS1-UP)
Service Magazine, SEPD0491, 4 October 1999, "Manufacturing Dimensions For Rear Axle A-Frame Support Block". Disregard this article. See the Special Instruction, REHS0931, "Replacement of the Support Blocks for the Rear Axle and Center Axle A-Frames".

The Special Instruction, REHS0931, "Replacement of the Support Blocks for the Rear Axle and Center Axle A-Frames" is available.

The Special Instruction contains the information in order to fabricate support blocks for the rear axle and center axle A-Frames. The instruction contains the instruction for the removal and the installation of the support blocks.

The Special Instruction is available through the Literature Distribution System. The publication can also be found on the Service Information System (SIS).

Caterpillar Information System:

2000/09/25 The Piston Pump (Propel) and the Piston Pump (Vibratory) have Changed {5070}
527 Track-Type Skidder Engine Supplement Turbocharger - Remove and Install
C-10, C-12, C-15 and C-16 Industrial Engines Diagnostic Codes
Caterpillar Monitoring System Quad Gauge Module
725 and 730 Articulated Trucks Window Washer Reservoir - Fill
TH62, TH63, TH82 and TH83 Telehandlers Steering System Piston Pump (Implement and Steering)
2000/09/04 A Special Instruction Is Available for Installing New Wiring Harnesses on Harvester Heads {5734}
Caterpillar Monitoring System MID 030 - CID 0826 - FMI 08
IT62G Series II Integrated Toolcarrier Indicators
527 Track-Type Skidder Engine Supplement Alternator - Remove and Install
2000/09/04 Pilot Valves Now Have Serviceable O-Rings and Seals {4342}
2000/09/04 Additional Plugs for the Collets Are Now Available {4303, 5305, 6107, 7000}
C-9 Engines for Caterpillar Built Machines Electric Starting Motor
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Axles, Differential and Brakes Axle, Differential and Brake Troubleshooting
CP-663E, CS-663E and CS-683E Vibratory Compactors Backup Alarm
IT62G Series II Integrated Toolcarrier Light Switches
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Hydraulic Tank and Mounting
725 and 730 Articulated Trucks Window Wiper - Inspect/Replace
527 Track-Type Skidder Engine Supplement Water Temperature Regulator - Remove and Install
CP-663E, CS-663E and CS-683E Vibratory Compactors Mirror
Use of Repair Kit for Nonmetallic Fuel Tanks {1273} Use of Repair Kit for Nonmetallic Fuel Tanks {1273}
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Axles, Differential and Brakes Axle (Front)
IT62G Series II Integrated Toolcarrier Window Wiper and Washer Control
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader CAT Data Link Circuit - Test
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.