Illustration 1 | g00822819 |
(1) Bracket assembly (2) Bolts (3) Clamp (4) Elbow (5) Sight gauge (6) Tank (7) Clamp (8) Clamp (9) Hydraulic tank breather filter (10) Clamp (11) Elbow |
(1) The clearance between the bracket and the rear face of the engine block ... 31 mm (1.2 inch)
(1) Minimum clearance between the bracket and tank (6) ... 7 mm (0.3 inch)
(2) When you assemble tank (6) to bracket (1) , hand tighten the four bolts before you torque the four bolts.
(3) The torque for the two clamps ... 4.5 ± .5 N·m (40.00 ± 4.00 lb in)
(4) The torque for the elbow ... 45.0 ± 5.0 N·m (33.00 ± 4.00 lb ft)
(5) The torque for the bolts for the sight gauge ... 12.0 ± 1.5 N·m (106.0 ± 13.0 lb in)
(6) Tank
(7) The torque for the clamp ... 4.5 ± .5 N·m (40.00 ± 4.00 lb in)
(8) The torque for the clamp ... 4.5 ± .5 N·m (40.00 ± 4.00 lb in)
(9) Install the hydraulic tank breather filter so that the air flow into the tank is in the direction of the arrow that is on the hydraulic tank breather filter.
(10) The torque for the clamp ... 0.9 ± 0.2 N·m (8.00 ± 2.00 lb in)
(11) The torque for the elbow ... 45.0 ± 5.0 N·m (33.00 ± 4.00 lb ft)