Modification Procedure for the Hydraulic Cooler Core{1374}
- Forwarders:
- 1088XLC (PIN: 9BW248, 253, 255, 257, 259, 261)
- 574 (PIN: 1FM216, 225, 229, 231, 237, 245-252)
Introduction
The 2W-7701 Hydraulic Cooler Core Assembly is a direct replacement for the 170-7374 Core that was installed in the listed forwarders. The 2W-7701 Hydraulic Cooler Core Assembly will need to be modified in order to be installed into the listed forwarders. The modification procedure is shown below.
Modification Procedure
Show/hide table
 | |
| Illustration 1 | g00733572 |
(A) 699.5 ± 1.5 mm (27.54 ± 0.06 inch) | |
Cut off the two tabs so that the length of the core assembly is equal to dimension (A).
Show/hide table
 | |
| Illustration 2 | g00733576 |
(B) 15 mm (0.6 inch) | |
Grind radius (B) on the four corners made by the two cuts.
Caterpillar Information System:
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Fuel Filter Base - Remove
IT38G Integrated Toolcarrier and 938G Wheel Loader Power Train Axle Housing - Assemble
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System Diagnostic Operation
Instructions for Installing New Wiring Harnesses on Harvester Heads Instructions for Installing New Wiring Harnesses on Harvester Heads
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader CID 0298 FMI 02 Incorrect Service Brake Pedal Switch inputs
CB-334D and CB-335D Vibratory Compactors Water Tank Strainer - Clean and Inspect
3126B Engine for Caterpillar Built Machines CID 0548 FMI 05 Throttle Lock Lamp open circuit
3126B Engine for Caterpillar Built Machines CID 0548 FMI 06 Throttle Lock Lamp short
3500B Engines and 776D, 777D, 784C, 785C, 789C, 793C and 793D Off-Highway Truck/Tractors Flywheel Housing Cover
980G Wheel Loader Steering System Check Valve (Steering Quad)
Topcon® System Five Specifications
CB-334D and CB-335D Vibratory Compactors Water Spray System Filter - Clean
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Engine Supplement Fuel Tank - Remove
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Engine Supplement Fuel Tank - Install
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Fuel Filter Base - Disassemble
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader CID 0650 FMI 12 Harness Code invalid
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Fuel Filter Base - Assemble
725 and 730 Articulated Trucks Cab - Tilt
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Fuel Filter Base - Install
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System Automatic Shifting
AP-1050B and BG-245C Asphalt Pavers Engine Hour Meter
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head Hydraulic System Pressure Reducing Valve (Measuring Arm Cylinder)
2000/09/11 Improved Parts for Purging Brakes are Available {4257}
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System Electronic Control Module (ECM) - Replace