CID 0548 FMI 06 Throttle Lock Lamp short
Conditions Which Generate This Code:
The Electronic Control Module (ECM) detects all of the following conditions:
- The ECM has detected a short to ground condition.
- The ECM has been powered for at least two seconds.
System Response:
The ECM will log the diagnostic code. The diagnostic code may be viewed on a display module or on the Caterpillar Electronic Technician (ET).
Troubleshooting:
Test Step 1.
Results:
- OK - STOP
Caterpillar Information System:
3500B Engines and 776D, 777D, 784C, 785C, 789C, 793C and 793D Off-Highway Truck/Tractors Flywheel Housing Cover
980G Wheel Loader Steering System Check Valve (Steering Quad)
Topcon® System Five Specifications
CB-334D and CB-335D Vibratory Compactors Water Spray System Filter - Clean
CB-334D and CB-335D Vibratory Compactors Cooling System Coolant (ELC) - Change
CB-334D and CB-335D Vibratory Compactors Cooling System Coolant Extender (ELC) - Add
2000/08/14 Correction to Operation and Maintenance Manuals, SEBU7015 and SEBU7020 for the Alternate Exit {7310}
IT38G Integrated Toolcarrier and 938G Wheel Loader Power Train Axle Housing - Disassemble
AP-1000B and BG-260C Asphalt Pavers Propel System Piston Motor (Propel)
2000/12/25 A New Drive Train ECM Is Available {4808}
IT38G Integrated Toolcarrier and 938G Wheel Loader Power Train Tire and Rim (Rear) - Remove and Install
330C Forest Machine Hydraulic System Hydraulic System Pressure - Release
3126B Engine for Caterpillar Built Machines CID 0548 FMI 05 Throttle Lock Lamp open circuit
CB-334D and CB-335D Vibratory Compactors Water Tank Strainer - Clean and Inspect
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader CID 0298 FMI 02 Incorrect Service Brake Pedal Switch inputs
Instructions for Installing New Wiring Harnesses on Harvester Heads Instructions for Installing New Wiring Harnesses on Harvester Heads
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System Diagnostic Operation
IT38G Integrated Toolcarrier and 938G Wheel Loader Power Train Axle Housing - Assemble
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Fuel Filter Base - Remove
Modification Procedure for the Hydraulic Cooler Core{1374} Modification Procedure for the Hydraulic Cooler Core{1374}
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Engine Supplement Fuel Tank - Remove
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Engine Supplement Fuel Tank - Install
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Fuel Filter Base - Disassemble
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader CID 0650 FMI 12 Harness Code invalid