2000/08/14 Caterpillar


Correction to Operation and Maintenance Manuals, SEBU7015 and SEBU7020 for the Alternate Exit {7310}

Usage:

928G 6XR
Integrated Toolcarrier:
IT28G (PIN: 8CR2062-UP; 9AR506-UP)
Wheel Loader:
928G (PIN: 6XR1836-UP; 7SR1005-UP)
Operation and Maintenance Manual, SEBU7015, "928G Wheel Loader", "Alternate Exit". Insert the following information.Operation and Maintenance Manual, SEBU7020, "IT28G Integrated Toolcarrier", "Alternate Exit". Insert the following information.

The machine may no longer use a lever to unlock an open door. Newer machines use a button on the side to unlock an open door.




Illustration 1g00608884

To release either cab door from the fully open position, press the release button on the side of the door.

Caterpillar Information System:

IT38G Integrated Toolcarrier and 938G Wheel Loader Power Train Axle Housing - Disassemble
AP-1000B and BG-260C Asphalt Pavers Propel System Piston Motor (Propel)
2000/12/25 A New Drive Train ECM Is Available {4808}
IT38G Integrated Toolcarrier and 938G Wheel Loader Power Train Tire and Rim (Rear) - Remove and Install
330C Forest Machine Hydraulic System Hydraulic System Pressure - Release
416D, 420D and 430D Backhoe Loaders Axles, Differential and Brakes Axle (Rear)
424D, 428D and 438D Backhoe Loaders Quick Coupler Control (Loader) - If Equipped
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Engine Supplement Air Cleaner - Remove and Install
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Engine Supplement Fuel Filter - Remove and Install
416D Backhoe Loader Multipurpose Controls
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Engine Supplement Water Separator - Remove and Install
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System MID 081 - CID 0668 - FMI 02
CB-334D and CB-335D Vibratory Compactors Cooling System Coolant Extender (ELC) - Add
CB-334D and CB-335D Vibratory Compactors Cooling System Coolant (ELC) - Change
CB-334D and CB-335D Vibratory Compactors Water Spray System Filter - Clean
Topcon® System Five Specifications
980G Wheel Loader Steering System Check Valve (Steering Quad)
3500B Engines and 776D, 777D, 784C, 785C, 789C, 793C and 793D Off-Highway Truck/Tractors Flywheel Housing Cover
3126B Engine for Caterpillar Built Machines CID 0548 FMI 06 Throttle Lock Lamp short
3126B Engine for Caterpillar Built Machines CID 0548 FMI 05 Throttle Lock Lamp open circuit
CB-334D and CB-335D Vibratory Compactors Water Tank Strainer - Clean and Inspect
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader CID 0298 FMI 02 Incorrect Service Brake Pedal Switch inputs
Instructions for Installing New Wiring Harnesses on Harvester Heads Instructions for Installing New Wiring Harnesses on Harvester Heads
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System Diagnostic Operation
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.