Check Valve (Steering Quad)
Show/hide table
 | |
| 图 1 | g01116709 |
转向四仪表单向阀以及转向四仪表单向阀和空档器的示意图 (1) 转向四仪表单向阀。 (2) 空档器。 (3) 止动块。 (A) 来自先导控制阀的油流。 (B) 流向空档器的油流。 | |
转向四仪表单向阀 (1) 是先导油系统的一部分。 来自先导控制阀的先导油流被转向四仪表单向阀 (1) 接收。 来自转向四仪表单向阀的油流流向空档器 (2) 。 转向四仪表单向阀具有两个用途。 转向四仪表单向阀可防止油回流到先导控制阀。 在滤网网眼堵塞的情况下，转向四仪表单向阀还可为高压油流向油箱提供备用通道。
Caterpillar Information System:
Topcon® System Five Specifications
CB-334D and CB-335D Vibratory Compactors Water Spray System Filter - Clean
CB-334D and CB-335D Vibratory Compactors Cooling System Coolant (ELC) - Change
CB-334D and CB-335D Vibratory Compactors Cooling System Coolant Extender (ELC) - Add
2000/08/14 Correction to Operation and Maintenance Manuals, SEBU7015 and SEBU7020 for the Alternate Exit {7310}
IT38G Integrated Toolcarrier and 938G Wheel Loader Power Train Axle Housing - Disassemble
AP-1000B and BG-260C Asphalt Pavers Propel System Piston Motor (Propel)
2000/12/25 A New Drive Train ECM Is Available {4808}
IT38G Integrated Toolcarrier and 938G Wheel Loader Power Train Tire and Rim (Rear) - Remove and Install
330C Forest Machine Hydraulic System Hydraulic System Pressure - Release
416D, 420D and 430D Backhoe Loaders Axles, Differential and Brakes Axle (Rear)
424D, 428D and 438D Backhoe Loaders Quick Coupler Control (Loader) - If Equipped
3500B Engines and 776D, 777D, 784C, 785C, 789C, 793C and 793D Off-Highway Truck/Tractors Flywheel Housing Cover
3126B Engine for Caterpillar Built Machines CID 0548 FMI 06 Throttle Lock Lamp short
3126B Engine for Caterpillar Built Machines CID 0548 FMI 05 Throttle Lock Lamp open circuit
CB-334D and CB-335D Vibratory Compactors Water Tank Strainer - Clean and Inspect
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader CID 0298 FMI 02 Incorrect Service Brake Pedal Switch inputs
Instructions for Installing New Wiring Harnesses on Harvester Heads Instructions for Installing New Wiring Harnesses on Harvester Heads
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System Diagnostic Operation
IT38G Integrated Toolcarrier and 938G Wheel Loader Power Train Axle Housing - Assemble
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Fuel Filter Base - Remove
Modification Procedure for the Hydraulic Cooler Core{1374} Modification Procedure for the Hydraulic Cooler Core{1374}
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Engine Supplement Fuel Tank - Remove
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Engine Supplement Fuel Tank - Install