Fuel Tank - Install
Installation Procedure
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | 1U-7505 | Jack | 1 |
- Position fuel tank (6) in position with Tool (A) .
Note: The weight of the fuel tank is 44 kg (97 lb).
Show/hide table
 | |
| Illustration 1 | g00527980 |
- Install two washers (10) and two bolts (9) .
Show/hide table
 | |
| Illustration 2 | g00527979 |
- Install two washers (8) and two bolts (7) .
Show/hide table
 | |
| Illustration 3 | g00528069 |
- Install the fuel sensor (5) and install five bolts (4). Replace tie-wrap (3) .
Show/hide table
 | |
| Illustration 4 | g00527977 |
- Connect the two tubing assemblies (1) .
Show/hide table
 | |
| Illustration 5 | g00527974 |
End By:
- Fill the fuel system. Refer to Operation and MaintenanceSEBU7399, "Refill Capacities" for the correct capacity.
- Prime the air from the fuel system. Refer to Operation and MaintenanceSEBU7399, "Fuel System - Prime" for the correct procedure.
Caterpillar Information System:
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Engine Supplement Fuel Tank - Remove
Modification Procedure for the Hydraulic Cooler Core{1374} Modification Procedure for the Hydraulic Cooler Core{1374}
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Fuel Filter Base - Remove
IT38G Integrated Toolcarrier and 938G Wheel Loader Power Train Axle Housing - Assemble
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System Diagnostic Operation
Instructions for Installing New Wiring Harnesses on Harvester Heads Instructions for Installing New Wiring Harnesses on Harvester Heads
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader CID 0298 FMI 02 Incorrect Service Brake Pedal Switch inputs
CB-334D and CB-335D Vibratory Compactors Water Tank Strainer - Clean and Inspect
3126B Engine for Caterpillar Built Machines CID 0548 FMI 05 Throttle Lock Lamp open circuit
3126B Engine for Caterpillar Built Machines CID 0548 FMI 06 Throttle Lock Lamp short
3500B Engines and 776D, 777D, 784C, 785C, 789C, 793C and 793D Off-Highway Truck/Tractors Flywheel Housing Cover
980G Wheel Loader Steering System Check Valve (Steering Quad)
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Fuel Filter Base - Disassemble
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader CID 0650 FMI 12 Harness Code invalid
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Fuel Filter Base - Assemble
725 and 730 Articulated Trucks Cab - Tilt
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Fuel Filter Base - Install
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System Automatic Shifting
AP-1050B and BG-245C Asphalt Pavers Engine Hour Meter
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head Hydraulic System Pressure Reducing Valve (Measuring Arm Cylinder)
2000/09/11 Improved Parts for Purging Brakes are Available {4257}
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System Electronic Control Module (ECM) - Replace
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System Speed Sensor - Adjust
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System Remote Direction Switch - Disable