Fuel Filter Base - Install
Installation Procedure
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Put fuel filter base (2) in position on the mounting bracket.
Show/hide table
Illustration 1 | g00767793 |
Typical example |
- Install two bolts (6) that fasten the fuel filter base to the mounting bracket.
- Remove the cap or the plug and connect fuel line (3) to fuel filter base (2) .
Show/hide table
Illustration 2 | g00767792 |
Typical example |
- Install fuel filter (5) on fuel filter base (2), as follows:
- Replace the seal on fuel filter base (2) .
- Insert fuel filter (5) in fuel filter base (2) .
- Install collar (4) on the fuel filter and turn the collar in the clockwise direction in order to lock fuel filter (5) on the fuel filter base. The locking collar is hand tightened only.
- Insert cap (1) into the top of fuel filter base (2). Install the collar that holds the cap into position.
Note: Some engines may have a hand priming pump on the fuel filter base. Refer to the Disassembly and Assembly Module, "Fuel Filter Base - Assemble" topic for information on installing the hand priming pump.
Caterpillar Information System:
725 and 730 Articulated Trucks Cab - Tilt
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Fuel Filter Base - Assemble
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader CID 0650 FMI 12 Harness Code invalid
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Fuel Filter Base - Disassemble
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Engine Supplement Fuel Tank - Install
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Engine Supplement Fuel Tank - Remove
Modification Procedure for the Hydraulic Cooler Core{1374} Modification Procedure for the Hydraulic Cooler Core{1374}
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Fuel Filter Base - Remove
IT38G Integrated Toolcarrier and 938G Wheel Loader Power Train Axle Housing - Assemble
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System Diagnostic Operation
Instructions for Installing New Wiring Harnesses on Harvester Heads Instructions for Installing New Wiring Harnesses on Harvester Heads
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader CID 0298 FMI 02 Incorrect Service Brake Pedal Switch inputs
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System Automatic Shifting
AP-1050B and BG-245C Asphalt Pavers Engine Hour Meter
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head Hydraulic System Pressure Reducing Valve (Measuring Arm Cylinder)
2000/09/11 Improved Parts for Purging Brakes are Available {4257}
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System Electronic Control Module (ECM) - Replace
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System Speed Sensor - Adjust
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System Remote Direction Switch - Disable
AP-1050B and BG-245C Asphalt Pavers Screed Travel Lock
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System System Schematic
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System System Schematic
AP-1000B and BG-260C Asphalt Pavers Propel System Propel Hydraulic System
416D Backhoe Loader Directional Turn Signal Control