Specifications
The basic machine specifications are listed in the table below.
Note: Optional equipment will affect these dimensions and weight.
Show/hide table
AP-1050B and BG-245C Pavers | |
Approximate Weight | |
Maximum Length | |
Width | |
Height | |
Show/hide table
AP-1050B and BG-245C with 10B Pavemaster Screed | |
Approximate Weight | |
Maximum Length(1) | |
Width | |
Height | |
Show/hide table
(1) | Maximum length with push roller |
Show/hide table
AP-1050B and BG-245C with 10-20B Extend-A-Mat Screed | |
Approximate Weight | |
Maximum Length(1) | |
Width | |
Height | |
Show/hide table
(1) | Maximum length with push roller |
Show/hide table
AP-1050B and BG-245C with 10-20WB Extend-A-Mat Screed | |
Approximate Weight | |
Maximum Length(1) | |
Width | |
Height | |
Show/hide table
(1) | Maximum length with push roller |
Show/hide table
AP-1050B and BG-245C with AS-2301 Screed | |
Approximate Weight | |
Maximum Length(1) | |
Width | |
Height | |
Show/hide table
(1) | Maximum length with push roller |
Caterpillar Information System:
CB-334D and CB-335D Vibratory Compactors Water Spray System Filter - Clean
CB-334D and CB-335D Vibratory Compactors Cooling System Coolant (ELC) - Change
CB-334D and CB-335D Vibratory Compactors Cooling System Coolant Extender (ELC) - Add
2000/08/14 Correction to Operation and Maintenance Manuals, SEBU7015 and SEBU7020 for the Alternate Exit {7310}
IT38G Integrated Toolcarrier and 938G Wheel Loader Power Train Axle Housing - Disassemble
AP-1000B and BG-260C Asphalt Pavers Propel System Piston Motor (Propel)
2000/12/25 A New Drive Train ECM Is Available {4808}
IT38G Integrated Toolcarrier and 938G Wheel Loader Power Train Tire and Rim (Rear) - Remove and Install
330C Forest Machine Hydraulic System Hydraulic System Pressure - Release
416D, 420D and 430D Backhoe Loaders Axles, Differential and Brakes Axle (Rear)
424D, 428D and 438D Backhoe Loaders Quick Coupler Control (Loader) - If Equipped
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Engine Supplement Air Cleaner - Remove and Install
980G Wheel Loader Steering System Check Valve (Steering Quad)
3500B Engines and 776D, 777D, 784C, 785C, 789C, 793C and 793D Off-Highway Truck/Tractors Flywheel Housing Cover
3126B Engine for Caterpillar Built Machines CID 0548 FMI 06 Throttle Lock Lamp short
3126B Engine for Caterpillar Built Machines CID 0548 FMI 05 Throttle Lock Lamp open circuit
CB-334D and CB-335D Vibratory Compactors Water Tank Strainer - Clean and Inspect
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader CID 0298 FMI 02 Incorrect Service Brake Pedal Switch inputs
Instructions for Installing New Wiring Harnesses on Harvester Heads Instructions for Installing New Wiring Harnesses on Harvester Heads
IT28G and IT38G Integrated Toolcarriers and 924G, 924GZ, 928G and 938G Wheel Loaders Power Train Electronic Control System Diagnostic Operation
IT38G Integrated Toolcarrier and 938G Wheel Loader Power Train Axle Housing - Assemble
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Fuel Filter Base - Remove
Modification Procedure for the Hydraulic Cooler Core{1374} Modification Procedure for the Hydraulic Cooler Core{1374}
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Engine Supplement Fuel Tank - Remove