924G and 924GZ Wheel Loaders Power Train Caterpillar

Disassembly Procedure

Start By:

1. Remove the differential and bevel gear. Refer to Disassembly and Assembly, "Differential and Bevel Gear - Remove".

Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.

Show/hide table

Illustration 1	g00667621

1. Remove the bolt and retainer (1).
   Show/hide table

   Illustration 2	g00667623

2. Remove shim pack (2), seal (3), and yoke assembly (4).
   Show/hide table

   Illustration 3	g00667624

3. Remove six bolts (5) and retainer (6).
   Show/hide table

   Illustration 4	g00667626

4. Remove seal (7).
   Show/hide table

   Illustration 5	g00667627

5. Use a suitable press in order to remove shaft assembly (8).
   Show/hide table

   Illustration 6	g00667628

   Note: Removal of the bearing will destroy the bearing.

6. Remove bearing cone (9).
   Show/hide table

   Illustration 7	g00667629

7. Remove bearing cone (10).
   Show/hide table

   Illustration 8	g00667630

8. Remove bearing cup (11).
   Show/hide table

   Illustration 9	g00667631

9. Remove bearing cup (12).