Load Sense Manifold - Assemble
Assembly Procedure
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
- Install valve body (21) on mounting plate (22). Install two bolts (20) and the washers.
Show/hide table
 | |
| Illustration 1 | g00668194 |
- Install three plugs (19) and the O-rings.
Show/hide table
 | |
| Illustration 2 | g00668156 |
- Install six O-rings (18) on valve group (17). Install valve group (17) .
Show/hide table
 | |
| Illustration 3 | g00668155 |
Show/hide table
 | |
| Illustration 4 | g00668154 |
- Install six O-rings (16) on valve group (15). Install valve group (15) .
- Install six O-rings (14) on valve group (11). Install valve group (11) .
Show/hide table
 | |
| Illustration 5 | g00668152 |
- Install six O-rings (13) on valve group (12) .
- Install valve group (12) .
Show/hide table
 | |
| Illustration 6 | g00668151 |
- Install nine O-rings (10) on valve group (9) .
Show/hide table
 | |
| Illustration 7 | g00668149 |
- Install valve group (9) .
Show/hide table
 | |
| Illustration 8 | g00668148 |
- Install fittings (6), fitting (7), fitting (8), and the O-ring seals.
Show/hide table
 | |
| Illustration 9 | g00668146 |
- Install fitting (5) and the O-ring seals. Install fittings (3), fitting (4), and the O-ring seals.
Show/hide table
 | |
| Illustration 10 | g00668144 |
- Install fitting (1), fitting (2) and the O-ring seals.
Show/hide table
 | |
| Illustration 11 | g00668143 |
End By: Install the load sensing manifold. Refer to Disassembly and Assembly, "Load Sense Manifold - Install" for the machine that is being serviced.
Caterpillar Information System:
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader CID 0100 FMI 13 Engine Oil Pressure calibration required
572R Pipelayer Machine Systems Load Sense Manifold - Disassemble
572R Pipelayer Machine Systems Load Sense Manifold - Install
572R Pipelayer Machine Systems Load Sense Manifold - Remove
572R Pipelayer Machine Systems Counterweight Control Valve - Assemble
CB-535B Vibratory Compactor Steering System Solenoid Valve (Wheel Tilt)
2000/01/17 Needle Peen Procedure Added To Special Instruction For Truck Frame Superstructure Retrofit {7050, 7253}
554 and 574 Forwarders Power Train Accumulator (Transmission Gearbox)
CB-214D, CB-224D and CB-225D Vibratory Compactors Propel System General Information
554 and 574 Forwarders Power Train Gear Pump (Transmission Gearbox)
554 and 574 Forwarders Power Train Oil Filter (Transmission Gearbox)
D250E Series II and D300E Series II Articulated Trucks Brakes, Indicators and Gauges - Test
3508B Engine for D11R Track-Type Tractors MID 036 - CID 0800 - FMI 09 Unable to communicate with VIMS
572R Pipelayer Machine Systems Hook Winch Motor - Disassemble
572R Pipelayer Machine Systems Hook Winch Motor - Assemble
572R Pipelayer Machine Systems Winch Control Valve - Disassemble
572R Pipelayer Machine Systems Winch Control Valve - Assemble
CB-535B Vibratory Compactor Propel System Drive and Vibratory Drum
3412E Engine for Caterpillar Built Machines CID 0091 FMI 02 Incorrect Throttle Switch inputs
2000/02/14 New Liquid Level Indicator (Coolant) Is Now Available {7470}
924G and 924GZ Wheel Loaders Power Train Differential Pinion (Front) - Disassemble
924G and 924GZ Wheel Loaders Power Train Differential Pinion (Front) - Assemble
CB-535B Vibratory Compactor Steering System Articulating and Oscillating Hitch
2000/04/17 Serial Numbers and Sequence Numbers Improve Component Life Tracking on Major Power Train Components {1000, 3030, 3101, 3258, 3284, 4050, 4208, 4234}