 | |
| Illustration 1 | g00667767 |
(1) Apply 9S-3263 Thread Lock Compound to the threads of the four bolts.
(2) Apply 9S-3263 Thread Lock Compound to the threads of the four bolts.
(3) Apply 9S-3263 Thread Lock Compound to the threads of the four bolts on the clamp.
Note: The total drum runout should be less than 6 mm (0.23 inch).
(4) The torque for the bolt ... 41 ± 8 N·m (30 ± 6 lb ft)
Apply 9S-3263 Thread Lock Compound to threads of the bolt.
(5) The torque for the six bolts ... 4 ± 1 N·m (35 ± 9 lb in)
(6) Apply 9S-3263 Thread Lock Compound to threads of the bolt.
(7) The torque for the eight nuts ... 198 ± 20 N·m (146 ± 15 lb ft)
Apply 9S-3263 Thread Lock Compound to threads of the bolts.
(8) After jam nut (7) has been tightened, bend the corners of the washer against the jam nut.
(9) Apply 9S-3263 Thread Lock Compound to threads of the bolts.
(10) Apply 9S-3263 Thread Lock Compound to threads of the bolts.
(11) Apply 9S-3263 Thread Lock Compound to threads of the bolts.