3408E and 3412E Engines for Caterpillar Built Machines Caterpillar


CID 0042 FMI 06 Injector Actuation Valve short to ground

Usage:

D10R 3KR
Conditions Which Generate This Code:

The Electronic Control Module (ECM) detects all of the following conditions:

  • The ECM reads a short circuit to the injection actuation pressure control valve (IAPCV).

  • Desired current is greater than 0.2 Amps.

  • The ECM has been powered for at least three seconds.

  • Battery voltage is greater than 9.0 VDC for two seconds.

  • The engine is not cranking.

System Response:

The ECM will log the diagnostic code. The diagnostic code may be viewed on a display module or on the Caterpillar Electronic Technician (Cat ET). The current to the IAPCV defaults to 0.0 Amps after 150 milliseconds. The ECM attempts to communicate with the IAPCV at intervals of 120 milliseconds.

  • Engine misfires

  • Low power

  • Reduced engine speed (rpm)

  • Engine shutdown

Test Step 1. Perform the following diagnostic procedure: Injection Actuation Pressure Control Valve Circuit - Test

Results:

  • OK - STOP

Caterpillar Information System:

3408E and 3412E Engines for Caterpillar Built Machines CID 0042 FMI 05 Injector Actuation Valve open circuit
2000/04/17 Serial Numbers and Sequence Numbers Improve Component Life Tracking on Major Power Train Components {1000, 3030, 3101, 3258, 3284, 4050, 4208, 4234}
CB-535B Vibratory Compactor Steering System Articulating and Oscillating Hitch
924G and 924GZ Wheel Loaders Power Train Differential Pinion (Front) - Assemble
924G and 924GZ Wheel Loaders Power Train Differential Pinion (Front) - Disassemble
2000/02/14 New Liquid Level Indicator (Coolant) Is Now Available {7470}
3412E Engine for Caterpillar Built Machines CID 0091 FMI 02 Incorrect Throttle Switch inputs
CB-535B Vibratory Compactor Propel System Drive and Vibratory Drum
572R Pipelayer Machine Systems Winch Control Valve - Assemble
572R Pipelayer Machine Systems Winch Control Valve - Disassemble
572R Pipelayer Machine Systems Hook Winch Motor - Assemble
572R Pipelayer Machine Systems Hook Winch Motor - Disassemble
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
834B and 836 Landfill Compactor Ether Starting Aid
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-900B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-240C Asphalt Pavers Equipment Lowering with Engine Stopped
228 and 248 Skid Steer Loaders Machine Systems Pilot Hydraulic System
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader CID 0110 FMI 04 Engine Coolant Temperature short to ground
3408E and 3412E Engines for Caterpillar Built Machines CID 0164 FMI 03 Injector Actuation Pressure voltage high
784C, 785B, 785C, 785D, 789B, 789C, 789D, 793B, 793C, 793D, 797 and 797B Off-Highway Trucks VIMS &trade; Suspension Cylinder Pressure Sensor
2000/03/06 Duo-Cone Seal Kits Have Changed for Off-Highway Trucks {4208, 4251, 7561}
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
3408E and 3412E Engines for Caterpillar Built Machines Engine Speed/Timing Sensor Circuit - Test
CB-535B Vibratory Compactor Propel System Drum Drive
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader CID 0172 FMI 04 Intake Manifold Air Temp short to ground
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.