Load Sense Manifold - Disassemble
Disassembly Procedure
Start By:
- Remove the load sensing manifold. Refer to Disassembly and Assembly, "Load Sense Manifold - Separate and Connect" for the machine that is being serviced.
Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
- Remove fittings (1) and (2) and the O-ring seals.
Show/hide table
Illustration 1 | g00668143 |
- Remove fittings (3), fitting (4), and the O-ring seals. Remove fitting (5) and the O-ring seals.
Show/hide table
Illustration 2 | g00668144 |
- Remove fittings (6), fitting (7), fitting (8) and the O-ring seals.
Show/hide table
Illustration 3 | g00668146 |
- Remove valve group (9) .
Show/hide table
Illustration 4 | g00668148 |
- Remove nine O-rings (10) from valve group (9) .
Show/hide table
Illustration 5 | g00668149 |
- Remove valve group (12) .
Show/hide table
Illustration 6 | g00668151 |
- Remove six O-rings (13) from valve group (12) .
Show/hide table
Illustration 7 | g00668152 |
- Remove valve group (11) .
- Remove six O-rings (14) from valve group (11) .
- Remove valve group (15) .
Show/hide table
Illustration 8 | g00668154 |
Show/hide table
Illustration 9 | g00668155 |
- Remove six O-rings (16) from valve group (15) .
- Remove valve group (17) .
- Remove six O-rings (18) from valve group (17) .
- Remove three plugs (19) and the O-rings.
Show/hide table
Illustration 10 | g00668156 |
- Remove two bolts (20) and the washers. Remove valve body (21) from mounting plate (22) .
Show/hide table
Illustration 11 | g00668194 |
Caterpillar Information System:
572R Pipelayer Machine Systems Load Sense Manifold - Install
572R Pipelayer Machine Systems Load Sense Manifold - Remove
572R Pipelayer Machine Systems Counterweight Control Valve - Assemble
CB-535B Vibratory Compactor Steering System Solenoid Valve (Wheel Tilt)
2000/01/17 Needle Peen Procedure Added To Special Instruction For Truck Frame Superstructure Retrofit {7050, 7253}
554 and 574 Forwarders Power Train Accumulator (Transmission Gearbox)
CB-214D, CB-224D and CB-225D Vibratory Compactors Propel System General Information
554 and 574 Forwarders Power Train Gear Pump (Transmission Gearbox)
554 and 574 Forwarders Power Train Oil Filter (Transmission Gearbox)
D250E Series II and D300E Series II Articulated Trucks Brakes, Indicators and Gauges - Test
3114, 3116 and 3126 MUI Engine Governors Throttle Lever (Types IV, V, VI, VII, and Some III) - Remove
CB-535B Vibratory Compactor Steering System Offset Valve
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader CID 0100 FMI 13 Engine Oil Pressure calibration required
572R Pipelayer Machine Systems Load Sense Manifold - Assemble
3508B Engine for D11R Track-Type Tractors MID 036 - CID 0800 - FMI 09 Unable to communicate with VIMS
572R Pipelayer Machine Systems Hook Winch Motor - Disassemble
572R Pipelayer Machine Systems Hook Winch Motor - Assemble
572R Pipelayer Machine Systems Winch Control Valve - Disassemble
572R Pipelayer Machine Systems Winch Control Valve - Assemble
CB-535B Vibratory Compactor Propel System Drive and Vibratory Drum
3412E Engine for Caterpillar Built Machines CID 0091 FMI 02 Incorrect Throttle Switch inputs
2000/02/14 New Liquid Level Indicator (Coolant) Is Now Available {7470}
924G and 924GZ Wheel Loaders Power Train Differential Pinion (Front) - Disassemble
924G and 924GZ Wheel Loaders Power Train Differential Pinion (Front) - Assemble