CB-434C, CB-534C and CB-634C Vibratory Compactors Water Spray System Caterpillar


Visual Inspection (Water Spray System)

Usage:

CB-534C 1WS

------ WARNING! ------

Escaping fluid under pressure, even a pinhole size leak, can penetrate body tissue, causing serious injury, and possible death. If fluid is injected into your skin, it must be treated immediately by a doctor familiar with this type of injury.

Always use a board or cardboard when checking for a leak.

----------------------

------ WARNING! ------

Personal injury can result from hydraulic oil pressure and hot oil.

Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.

Make sure all of the attachments have been lowered, oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.

----------------------


NOTICE

Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.

Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide", for tools and supplies suitable to collect and contain fluids in Caterpillar machines.

Dispose of all fluids according to local regulations and mandates.


A visual inspection of the water system and the components is the first step when a diagnosis of a problem is made. Check the operation of the system next.

  1. Check the water level in both of the water tanks.

  1. Check all the water lines, the hoses, and the connections for leaks and damage.

Caterpillar Information System:

3412E Engine Supplement for 773D Off-Highway Trucks and 775D Off-Highway Quarry Trucks Engine Oil Filter and Oil Filter Base - Remove and Install
515 Wheel Skidder and 525 Wheel Skidder Steering Frame Lock
D250E Series II and D300E Series II Articulated Trucks Power Train Center Drive Axle - Install
D250E Series II and D300E Series II Articulated Trucks Power Train Center Drive Axle - Remove
D250E Series II and D300E Series II Articulated Trucks Power Train Front Drive Axle - Install
CB-434C, CB-534C and CB-634C Vibratory Compactors Water Spray System Machine Preparation for Troubleshooting
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Steering and Brake Manifold Valve - Disassemble
D250E Series II and D300E Series II Articulated Trucks Power Train Front Drive Axle - Remove
D250E Series II and D300E Series II Articulated Trucks Power Train Rear Drive Axle - Install
D250E Series II and D300E Series II Articulated Trucks Power Train Rear Drive Axle - Remove
527 Track-Type Skidder Unhooking Winch Cable from Logs
554 Forwarder and 574 Forwarder Engine and Cab Preheat System - If Equipped
527 Track-Type Skidder Power Train Idlers (Track)
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Drawbar Wearplates, Swing Stops - Replace
3406E On-Highway Engine Camshaft Bearings - Remove
D250E Series II and D300E Series II Articulated Trucks Power Train Front Drive Shaft - Remove and Install
D250E Series II and D300E Series II Articulated Trucks Power Train Main Drive Shaft - Remove and Install
D250E Series II and D300E Series II Articulated Trucks Power Train Output Transfer Gears - Assemble
D250E Series II and D300E Series II Articulated Trucks Power Train Output Transfer Gears - Disassemble
CB-434C, CB-534C and CB-634C Vibratory Compactors Water Spray System Water Spray System Troubleshooting
D250E Series II and D300E Series II Articulated Trucks Power Train Shift Cylinder - Remove and Install
D250E Series II and D300E Series II Articulated Trucks Power Train Spindle - Install
D250E Series II and D300E Series II Articulated Trucks Power Train Spindle - Remove
D250E Series II and D300E Series II Articulated Trucks Power Train Transmission and Transfer Gears - Separate
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.