Hook Sheave Block (Upper) - Assemble
Assembly Procedure
- Install pin (12) on plate assembly (19) .
Show/hide table
Illustration 1 | g00542966 |
- Install washer (21) .
Show/hide table
Illustration 2 | g00542962 |
- Install sheave (20) .
Show/hide table
Illustration 3 | g00542957 |
- Position anchor yoke (4) on plate assembly (19) .
Show/hide table
Illustration 4 | g00542955 |
- Install center plate (18) and washer (17) .
Show/hide table
Illustration 5 | g00542953 |
- Install sheave (16) on the pin.
Show/hide table
Illustration 6 | g00542950 |
- Install center plate (15) and washer (14) .
Show/hide table
Illustration 7 | g00542948 |
- Install sheave (13) on pin (12) .
Show/hide table
Illustration 8 | g00542945 |
- Install spacer (11) and washer (10) .
Show/hide table
Illustration 9 | g00542918 |
- Install plate assembly (6) .
Show/hide table
Illustration 10 | g00542915 |
- Install bolts (7), the washers and nuts (9) .
- Install bolts (5), the washers and nuts (8) .
- Position trunnion (1) on anchor yoke (4) .
Show/hide table
Illustration 11 | g00542910 |
- Install yoke pin (3) in the anchor yoke and the trunnion.
- Install cotter pin (2) in the yoke pin.
- Lubricate the bearings in the hook sheave block (upper). Refer to Operation and Maintenance Manual, SEBU7109, "Sheave Block Bearings - Lubricate".
End By: Install the hook sheave block (upper). Refer to Disassembly and Assembly, "Hook Sheave Block (Upper) - Install".
Caterpillar Information System:
583R Pipelayer Power Train Recoil Spring - Install
769D Off-Highway Truck and 771D Quarry Truck Front Suspension Cylinder Rods - Lubricate
583R Pipelayer Machine Systems Hook Sheave Block (Upper) - Disassemble
CB-534C Vibratory Compactor Rollover Protective Structure (ROPS) - Inspect
784C, 785C and 785C HAA Off-Highway Truck/Tractors Hydraulic System Control Valve (Hoist)
3406E On-Highway Engine Valve Mechanism Cover Base - Remove and Install
583R Pipelayer Machine Systems Sheave Block (Lower) - Assemble
3306C Engines for Caterpillar Built Machines Air Shutoff Solenoid
583R Pipelayer Power Train Power Train Oil Pump - Remove
583R Pipelayer Machine Systems Sheave Block (Lower) - Disassemble
769D Off-Highway Truck and 771D Quarry Truck Engine Crankcase Breather - Clean
Caterpillar Monitoring System Normal Mode
583R Pipelayer Power Train Power Train Oil Pump - Install
IT14G Integrated Toolcarrier and 914G Wheel Loader Engine Supplement Engine and Pumps - Remove
IT14G Integrated Toolcarrier and 914G Wheel Loader Engine Supplement Engine and Pumps - Install
IT14G Integrated Toolcarrier and 914G Wheel Loader Standard Power Train Fixed Axle and Oscillating Axle
769D Off-Highway Truck and 771D Quarry Truck Fuel System Water Separator - Drain
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0190 FMI 03 Speed Sensor (Engine) Voltage Above Normal - Test
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System Diverter Valve (Ride Control) - Isolation and Drift Check
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0190 FMI 04 Speed Sensor (Engine) Voltage Below Normal - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0190 FMI 08 Speed Sensor (Engine) Abnormal Signal - Test
836G Landfill Compactor and 834G Wheel Dozer Lift Control
3406C Engines for Caterpillar Built Machines Ether Starting Aid
769D Off-Highway Truck and 771D Quarry Truck Hoist Cylinder Bearings - Lubricate