Hook Sheave Block (Upper) - Disassemble
Disassembly Procedure
Start By:
- Remove the hook sheave block (upper). Refer to Disassembly and Assembly, "Hook Sheave Block (Upper) - Remove".
- Remove cotter pin (2) from yoke pin (3). Remove the yoke pin from anchor yoke (4) .
Show/hide table
Illustration 1 | g00542910 |
- Remove trunnion (1) from the anchor yoke.
- Remove nuts (8), the washers and bolts (5) .
Show/hide table
Illustration 2 | g00542915 |
- Remove nuts (9), the washers and bolts (7) .
- Remove plate assembly (6) .
- Remove washer (10) and spacer (11) .
Show/hide table
Illustration 3 | g00542918 |
- Remove sheave (13) from pin (12) .
Show/hide table
Illustration 4 | g00542945 |
- Remove washer (14) and center plate (15) .
Show/hide table
Illustration 5 | g00542948 |
- Remove sheave (16) from the pin.
Show/hide table
Illustration 6 | g00542950 |
- Remove washer (17) and center plate (18) .
Show/hide table
Illustration 7 | g00542953 |
- Remove anchor yoke (4) from plate assembly (19) .
Show/hide table
Illustration 8 | g00542955 |
- Remove sheave (20) .
Show/hide table
Illustration 9 | g00542957 |
- Remove washer (21) .
Show/hide table
Illustration 10 | g00542962 |
- Remove pin (12) from plate assembly (19) .
Show/hide table
Illustration 11 | g00542966 |
Caterpillar Information System:
CB-534C Vibratory Compactor Rollover Protective Structure (ROPS) - Inspect
784C, 785C and 785C HAA Off-Highway Truck/Tractors Hydraulic System Control Valve (Hoist)
3406E On-Highway Engine Valve Mechanism Cover Base - Remove and Install
583R Pipelayer Machine Systems Sheave Block (Lower) - Assemble
3306C Engines for Caterpillar Built Machines Air Shutoff Solenoid
583R Pipelayer Power Train Power Train Oil Pump - Remove
583R Pipelayer Machine Systems Sheave Block (Lower) - Disassemble
769D Off-Highway Truck and 771D Quarry Truck Engine Crankcase Breather - Clean
Caterpillar Monitoring System Normal Mode
583R Pipelayer Power Train Power Train Oil Filter - Assemble
CB-534C Vibratory Compactor Fuel System - Prime
3406C Engines for Caterpillar Built Machines Governor
769D Off-Highway Truck and 771D Quarry Truck Front Suspension Cylinder Rods - Lubricate
583R Pipelayer Power Train Recoil Spring - Install
583R Pipelayer Machine Systems Hook Sheave Block (Upper) - Assemble
583R Pipelayer Power Train Power Train Oil Pump - Install
IT14G Integrated Toolcarrier and 914G Wheel Loader Engine Supplement Engine and Pumps - Remove
IT14G Integrated Toolcarrier and 914G Wheel Loader Engine Supplement Engine and Pumps - Install
IT14G Integrated Toolcarrier and 914G Wheel Loader Standard Power Train Fixed Axle and Oscillating Axle
769D Off-Highway Truck and 771D Quarry Truck Fuel System Water Separator - Drain
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0190 FMI 03 Speed Sensor (Engine) Voltage Above Normal - Test
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System Diverter Valve (Ride Control) - Isolation and Drift Check
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0190 FMI 04 Speed Sensor (Engine) Voltage Below Normal - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0190 FMI 08 Speed Sensor (Engine) Abnormal Signal - Test