| |
| Illustration 1 | g00502190 |
|
FLOAT (1) - Push the lever forward to the DETENT position. The blade will lower to the ground. The blade will float with the contour of the ground. The lever will remain in the FLOAT position until the lever is released from the DETENT position. After the lever is released, the lever will return to the HOLD position. |
|
LOWER (2) - Push the lever forward in order to lower the blade. The lever will return to the HOLD position when you release the lever. The blade will remain in the selected position. |
|
HOLD (3) - The lever will return to the HOLD position when you release the lever from the RAISE position or from the LOWER position. The blade will remain in the selected position. |
|
RAISE (4) - Pull back the lever in order to raise the blade. The lever will return to the HOLD position when you release the lever. The blade will remain in the selected position. |
The lever is detented in the full RAISE position. The lever will stay in the DETENT position and the blade will continue to rise until the blade reaches the height that is set by the lift kickout. The lever will then return to the HOLD position.