Water Separator - Remove and Install
Removal Procedure
Show/hide table
Required Tools     | |||
Tools     | Part Number     | Description     | Qty     |
A     | 2P-8250     | Strap Wrench Assembly     | 1     |
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
Note: The water separator is located under the fuel tank.
- Close the fuel valve at the fuel tank.
- Drain the water separator bowl into a suitable container for disposal.
Show/hide table
Illustration 1 | g00610917 |
- Use Tooling (A) to remove water separator element (1) .
Installation Procedure
- Lubricate the gasket for the water separator element with fuel. Install water separator element (1) until the gasket makes contact with the base. Use Tooling (A) to install one-half turn onto the element.
Show/hide table
Illustration 2 | g00610917 |
- Open the fuel valve.
Caterpillar Information System:
Lexion 450, Lexion 460, Lexion 465 andLexion 470 Combines Engine Supplement Water Pump - Remove
Lexion 450, Lexion 460, Lexion 465 andLexion 470 Combines Engine Supplement Water Pump - Install
Lexion 450, Lexion 460, Lexion 465 andLexion 470 Combines Engine Supplement V-Belts - Remove and Install
Lexion 450, Lexion 460, Lexion 465 andLexion 470 Combines Engine Supplement Turbocharger - Remove
Lexion 450, Lexion 460, Lexion 465 andLexion 470 Combines Engine Supplement Turbocharger - Install
Lexion 450, Lexion 460, Lexion 465 andLexion 470 Combines Engine Supplement Transfer Gearbox - Remove
Lexion 450, Lexion 460, Lexion 465 andLexion 470 Combines Engine Supplement Transfer Gearbox - Disassemble
Lexion 450, Lexion 460, Lexion 465 andLexion 470 Combines Engine Supplement Transfer Gearbox - Assemble
Lexion 450, Lexion 460, Lexion 465 andLexion 470 Combines Engine Supplement Rotary Screen Drive - Remove
583R Pipelayer Machine Systems Hook Sheave Block (Upper) - Remove
Lexion 450, Lexion 460, Lexion 465 andLexion 470 Combines Engine Supplement Rotary Screen Drive - Install
Lexion 450, Lexion 460, Lexion 465 andLexion 470 Combines Engine Supplement Refrigerant Condenser - Remove and Install
Lexion 450, Lexion 460, Lexion 465 andLexion 470 Combines Engine Supplement Water Temperature Regulator - Install
IT14G Integrated Toolcarrier and 914G Wheel Loader Engine Supplement Fuel Filter - Remove and Install
980G Wheel Loader Power Train Transmission Oil Pump - Remove
784C and 785C Off-Highway Trucks Machine Systems Check Valve (Front Air/Hydraulic Cylinder) - Remove and Install
Lexion 450, Lexion 460, Lexion 465 andLexion 470 Combines Engine Supplement Water Temperature Regulator - Remove
824G , 825G and 826G Landfill Compactor Transmission Control
Lexion 450, Lexion 460, Lexion 465 andLexion 470 Combines Engine Supplement Water Temperature Sensor - Remove and Install
784C, 785C and 785C HAA Off-Highway Truck/Tractors Power Train Power Train Electrical System
784C and 785C Off-Highway Trucks Machine Systems Check Valve (Rear Air/Hydraulic Cylinder) - Remove and Install
769D Off-Highway Truck and 771D Quarry Truck Lowering the Body with Engine Stopped
784C, 785C and 785C HAA Off-Highway Truck/Tractors Power Train Transmission Hydraulic System
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Engine Supplement Hydraulic Oil Cooler - Remove and Install